• 文献检索
  • 文档翻译
  • 深度研究
  • 学术资讯
  • Suppr Zotero 插件Zotero 插件
  • 邀请有礼
  • 套餐&价格
  • 历史记录
应用&插件
Suppr Zotero 插件Zotero 插件浏览器插件Mac 客户端Windows 客户端微信小程序
定价
高级版会员购买积分包购买API积分包
服务
文献检索文档翻译深度研究API 文档MCP 服务
关于我们
关于 Suppr公司介绍联系我们用户协议隐私条款
关注我们

Suppr 超能文献

核心技术专利：CN118964589B侵权必究
粤ICP备2023148730 号-1Suppr @ 2026

文献检索

告别复杂PubMed语法，用中文像聊天一样搜索，搜遍4000万医学文献。AI智能推荐，让科研检索更轻松。

立即免费搜索

文件翻译

保留排版，准确专业，支持PDF/Word/PPT等文件格式，支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述，25分钟生成高质量综述，智能提取关键信息，辅助科研写作。

立即免费体验

聚苯硫醚颗粒和薄膜对聚苯硫醚复合材料性能的影响。

Effect of Polyphenylene Sulphide Particles and Films on the Properties of Polyphenylene Sulphide Composites.

作者信息

Sun Zeyu, Sun Li, Zhu Chengyan, Tian Wei, Shao Lingda, Feng Xuhuang, Huang Kunzhen

机构信息

Key Laboratory of Advanced Textile Materials and Preparation Technology of the Ministry of Education, College of Textiles Science and Engineering, Zhejiang Sci-Tech University (Xiasha Campus), Hangzhou 310018, China.

Zhejiang Sci-Tech University Huzhou Research Institute Co., Ltd., Huzhou 313000, China.

出版信息

Materials (Basel). 2022 Oct 29;15(21):7616. doi: 10.3390/ma15217616.

DOI:10.3390/ma15217616
PMID:36363208
原文链接:https://pmc.ncbi.nlm.nih.gov/articles/PMC9655593/
Abstract

Glass fibre-reinforced polyphenylene sulphide composites were prepared by hot-pressing glass fibre fabrics and polyphenylene sulphide resins. The effects of different polyphenylene sulphide resin forms on the properties of the composites were investigated using scanning electron microscopy, dynamic mechanical analyser, pendulum impact tester and universal testing machine. The results showed that different polyphenylene sulphide resin forms had nearly no effect on the glass transition temperature of the composites, which are all located at about 100 °C. Compared with other polyphenylene sulphide composites, the bending strength of polyphenylene sulphide film composites was the highest, reaching 314.58 MPa, and the impact strength of polyphenylene sulphide particle composites was the highest, reaching 245.4 KJ/m. The bending strength and impact strength were calculated using a standard fraction, and the highest standard fraction was obtained when the ratio of polyphenylene sulphide film to particle was 1:2. The impact strength and bending strength could be obtained. The impact strength reached 229.8 KJ/m, and the bending strength reached 284.16 MPa.

摘要

通过热压玻璃纤维织物和聚苯硫醚树脂制备了玻璃纤维增强聚苯硫醚复合材料。使用扫描电子显微镜、动态力学分析仪、摆锤冲击试验机和万能试验机研究了不同形态的聚苯硫醚树脂对复合材料性能的影响。结果表明，不同形态的聚苯硫醚树脂对复合材料的玻璃化转变温度几乎没有影响，均位于约100℃。与其他聚苯硫醚复合材料相比，聚苯硫醚薄膜复合材料的弯曲强度最高，达到314.58MPa，聚苯硫醚颗粒复合材料的冲击强度最高，达到245.4kJ/m²。弯曲强度和冲击强度采用标准分数计算，当聚苯硫醚薄膜与颗粒的比例为1:2时，获得最高标准分数。可获得冲击强度和弯曲强度。冲击强度达到229.8kJ/m²，弯曲强度达到284.16MPa。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/2d79179d32c7/materials-15-07616-g009.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/53268bdaf2ba/materials-15-07616-g001.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/ceaaafed47b7/materials-15-07616-g002.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/b5112b6e5c46/materials-15-07616-g003.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/c06f3aad5cf4/materials-15-07616-g004.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/4eb8c27fca58/materials-15-07616-g005.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/b80f1d952de5/materials-15-07616-g006.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/3b955aebbda2/materials-15-07616-g007a.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/f50a303e2f1d/materials-15-07616-g008.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/2d79179d32c7/materials-15-07616-g009.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/53268bdaf2ba/materials-15-07616-g001.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/ceaaafed47b7/materials-15-07616-g002.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/b5112b6e5c46/materials-15-07616-g003.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/c06f3aad5cf4/materials-15-07616-g004.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/4eb8c27fca58/materials-15-07616-g005.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/b80f1d952de5/materials-15-07616-g006.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/3b955aebbda2/materials-15-07616-g007a.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/f50a303e2f1d/materials-15-07616-g008.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f649/9655593/2d79179d32c7/materials-15-07616-g009.jpg

相似文献

1
Effect of Polyphenylene Sulphide Particles and Films on the Properties of Polyphenylene Sulphide Composites.聚苯硫醚颗粒和薄膜对聚苯硫醚复合材料性能的影响。
Materials (Basel). 2022 Oct 29;15(21):7616. doi: 10.3390/ma15217616.
2
Study on Preparation and Properties of Glass Fibre Fabric Reinforced Polyphenylene Sulphide Composites.玻璃纤维织物增强聚苯硫醚复合材料的制备与性能研究
Materials (Basel). 2022 Dec 17;15(24):9036. doi: 10.3390/ma15249036.
3
Improving interfacial and mechanical properties of glass fabric/polyphenylene sulfide composites grafting multi-walled carbon nanotubes.通过接枝多壁碳纳米管改善玻璃纤维织物/聚苯硫醚复合材料的界面和力学性能
RSC Adv. 2019 Oct 14;9(56):32634-32643. doi: 10.1039/c9ra05805b. eCollection 2019 Oct 10.
4
Experimental Investigation on Mechanical Characterization of Epoxy-E-Glass Fiber-Particulate Reinforced Hybrid Composites.环氧-E玻璃纤维-颗粒增强混杂复合材料力学性能的实验研究
ACS Omega. 2024 May 25;9(23):24761-24773. doi: 10.1021/acsomega.4c01365. eCollection 2024 Jun 11.
5
Influence of silane coupling agent on the mechanical performance of flowable fibre-reinforced dental composites.硅烷偶联剂对可流动纤维增强牙科复合材料力学性能的影响。
Dent Mater. 2022 Jul;38(7):1173-1183. doi: 10.1016/j.dental.2022.06.002. Epub 2022 Jun 9.
6
Influence of airborne-particle abrasion on mechanical properties and bond strength of carbon/epoxy and glass/bis-GMA fiber-reinforced resin posts.空气颗粒磨损对碳/环氧树脂和玻璃/双酚A甲基丙烯酸缩水甘油酯纤维增强树脂桩的力学性能和粘结强度的影响
J Prosthet Dent. 2008 Jun;99(6):444-54. doi: 10.1016/S0022-3913(08)60106-7.
7
Thermal Aging Effects on the Mechanical Behavior of Glass-Fiber-Reinforced Polyphenylene Sulfide Composites.热老化对玻璃纤维增强聚苯硫醚复合材料力学性能的影响
Polymers (Basel). 2022 Mar 22;14(7):1275. doi: 10.3390/polym14071275.
8
The effect of filler loading and morphology on the mechanical properties of contemporary composites.填料含量和形态对当代复合材料力学性能的影响。
J Prosthet Dent. 2002 Jun;87(6):642-9. doi: 10.1067/mpr.2002.125179.
9
Laboratory strength of glass ionomer cement, compomers, and resin composites.玻璃离子水门汀、复合体和树脂复合材料的实验室强度。
J Prosthodont. 2002 Jun;11(2):86-91.
10
Effects of glass fiber layering on the flexural strength of microfill and hybrid composites.玻璃纤维分层对微填料和混合复合材料弯曲强度的影响。
J Esthet Restor Dent. 2009;21(3):171-8; discussion 179-81. doi: 10.1111/j.1708-8240.2009.00259.x.

引用本文的文献

1
Improvement of Bonding Strength Between Polyphenylene Sulfide/Glass Fiber Composites and Epoxy via Atmospheric-Pressure Plasma Surface Treatment.通过大气压等离子体表面处理提高聚苯硫醚/玻璃纤维复合材料与环氧树脂之间的粘结强度
Polymers (Basel). 2025 May 14;17(10):1344. doi: 10.3390/polym17101344.
2
Recycling and Degradation Pathways of Synthetic Textile Fibers such as Polyamide and Elastane.聚酰胺和氨纶等合成纺织纤维的回收与降解途径
Glob Chall. 2025 Mar 13;9(4):2400163. doi: 10.1002/gch2.202400163. eCollection 2025 Apr.

本文引用的文献

1
Thermal, viscoelastic and mechanical properties' optimization of polyphenylene sulfide via optimal processing parameters using the Taguchi method.通过田口方法使用最佳工艺参数对聚苯硫醚的热、粘弹性和机械性能进行优化。
J Appl Stat. 2016 Feb 24;43(14):2661-2680. doi: 10.1080/02664763.2016.1142948. eCollection 2016.
2
Chemical Surface Modification Methods of Resin Composite Repaired with Resin-Modified Glass-Ionomer Cement.用树脂改性玻璃离子水门汀修复树脂复合材料的化学表面改性方法
Eur J Dent. 2023 Jul;17(3):804-808. doi: 10.1055/s-0042-1755627. Epub 2022 Oct 11.
3
Enhanced Impact Properties of Hybrid Composites Reinforced by Carbon Fiber and Polyimide Fiber.
碳纤维和聚酰亚胺纤维增强混杂复合材料的冲击性能增强
Polymers (Basel). 2021 Aug 5;13(16):2599. doi: 10.3390/polym13162599.
4
Comprehensive Review of the Properties and Modifications of Carbon Fiber-Reinforced Thermoplastic Composites.碳纤维增强热塑性复合材料的性能与改性综合综述
Polymers (Basel). 2021 Jul 27;13(15):2474. doi: 10.3390/polym13152474.
5
Reversible and Irreversible Color Change during Photo and Thermal Degradation of PolyphenyleneSulfide Composite.聚苯硫醚复合材料光降解和热降解过程中的可逆与不可逆颜色变化
Polymers (Basel). 2019 Sep 27;11(10):1579. doi: 10.3390/polym11101579.
6
Characterization and Research on Mechanical Properties of Bamboo Plastic Composites.竹塑复合材料的力学性能表征与研究
Polymers (Basel). 2018 Jul 25;10(8):814. doi: 10.3390/polym10080814.
7
Surface Modification of Carbon Fibers by Grafting PEEK-NH2 for Improving Interfacial Adhesion with Polyetheretherketone.通过接枝聚醚醚酮氨基对碳纤维进行表面改性以改善与聚醚醚酮的界面粘附力
Materials (Basel). 2019 Mar 7;12(5):778. doi: 10.3390/ma12050778.
8
Effects of Styrene-Acrylic Sizing on the Mechanical Properties of Carbon Fiber Thermoplastic Towpregs and Their Composites.苯乙烯-丙烯酸酯上浆剂对碳纤维热塑性预浸料及其复合材料力学性能的影响。
Molecules. 2018 Mar 1;23(3):547. doi: 10.3390/molecules23030547.
9
Effects of (Oxy-)Fluorination on Various High-Performance Yarns.（氧）氟化对各种高性能纱线的影响。
Molecules. 2016 Aug 26;21(9):1127. doi: 10.3390/molecules21091127.
10
Dynamic infrared study of polyphenylene sulfide using planar array infrared spectroscopy.使用平面阵列红外光谱法对聚苯硫醚进行动态红外研究。
Appl Spectrosc. 2008 Oct;62(10):1124-8. doi: 10.1366/000370208786049060.