Laboratory of Biomechanical Orthopaedics, Institute of Bioengineering, School of Engineering, EPFL, Lausanne1015, Switzerland.
Laboratory of Applied Photonics Devices, Institute of Electrical and Micro Engineering, School of Engineering, EPFL, Lausanne1015, Switzerland.
Biomacromolecules. 2022 Dec 12;23(12):5007-5017. doi: 10.1021/acs.biomac.2c00811. Epub 2022 Nov 15.
The surgical treatments of injured soft tissues lead to further injury due to the use of sutures or the surgical routes, which need to be large enough to insert biomaterials for repair. In contrast, the use of low viscosity photopolymerizable hydrogels that can be inserted with thin needles represents a less traumatic treatment and would therefore reduce the severity of iatrogenic injury. However, the delivery of light to solidify the inserted hydrogel precursor requires a direct access to it, which is mostly invasive. To circumvent this limitation, we investigate the approach of curing the hydrogel located behind biological tissues by sending near-infrared (NIR) light through the latter, as this spectral region has the largest transmittance in biological tissues. Upconverting nanoparticles (UCNPs) are incorporated in the hydrogel precursor to convert NIR transmitted through the tissues into blue light to trigger the photopolymerization. We investigated the photopolymerization process of an adhesive hydrogel placed behind a soft tissue. Bulk polymerization was achieved with local radiation of the adhesive hydrogel through a focused light system. Thus, unlike the common methods for uniform illumination, adhesion formation was achieved with local micrometer-sized radiation of the bulky hydrogel through a gradient photopolymerization phenomenon. Nanoindentation and upright microscope analysis confirmed that the proposed approach for indirect curing of hydrogels below the tissue is a gradient photopolymerization phenomenon. Moreover, we found that the hydrogel mechanical and adhesive properties can be modulated by playing with different parameters of the system such as the NIR light power and the UCNP concentration. The proposed photopolymerization of adhesive hydrogels below the tissue opens the prospect of a minimally invasive surgical treatment of injured soft tissues.
受伤软组织的外科治疗由于使用缝线或手术途径而导致进一步的损伤,这些途径需要足够大才能插入用于修复的生物材料。相比之下,使用低粘度的光聚合可注射水凝胶可以通过细针插入,代表了一种创伤较小的治疗方法,因此可以减轻医源性损伤的严重程度。然而,将光传递到插入的水凝胶前体以使其固化需要直接进入,这通常是侵入性的。为了规避此限制,我们研究了通过将近红外(NIR)光穿过生物组织来固化位于生物组织后面的水凝胶的方法,因为该光谱区域在生物组织中有最大的透过率。上转换纳米粒子(UCNP)被掺入水凝胶前体中,以将透过组织的 NIR 光转换为蓝光,从而引发光聚合。我们研究了位于软组织后面的粘性水凝胶的光聚合过程。通过聚焦光系统对粘性水凝胶进行局部辐射,实现了本体聚合。因此,与用于均匀照明的常见方法不同,通过梯度光聚合现象实现了对大块水凝胶的局部微米级辐射的粘附形成。纳米压痕和直立显微镜分析证实,用于在组织下方间接固化水凝胶的方法是梯度光聚合现象。此外,我们发现可以通过调整系统的不同参数(例如 NIR 光功率和 UCNP 浓度)来调节水凝胶的机械和粘附性能。提出的在组织下方对粘性水凝胶进行光聚合的方法为受伤软组织的微创外科治疗开辟了前景。