Good Samaritan Regional Medical Center, Corvallis, OR 97330, USA.
Medicina (Kaunas). 2023 Jan 13;59(1):162. doi: 10.3390/medicina59010162.
: a primary goal in revision total knee arthroplasty is to recreate and restore near-normal knee biomechanics by reapproximating the native anatomy. Tibial bone loss poses a challenge for surgeons. Bone cement, bone allograft, screws-in-cement, metaphyseal sleeves or cones, and metallic augments are some options for addressing bony deficiency, with endoprosthetic proximal tibia replacement a consideration for the most severe cases. : we present a case for the novel use of threaded Steinmann pins augmented with cement to reconstruct a massive tibial metaphyseal cortical defect during revision knee arthroplasty. A 76-year-old male presented with an infected primary total knee arthroplasty using MSIS (Musculoskeletal Infection Society) criteria and underwent a standard two-stage revision total knee arthroplasty once the knee was confirmed sterile. Intraoperatively, significant posteromedial and metaphyseal tibial bone loss was identified. In order to avoid proximal tibial replacement and the extensor mechanism complications seen with these, coupled with obligate gastrocnemius flap, a metaphyseal cone was utilized in the proximal tibia with four vertical threaded Steinmann pins spaced approximately 1 cm apart at its periphery, subsequently cut flush with the level of the cone after cementation to recreate the tibial cortex. The patient's function and range of motion continue to improve with no evidence of structural complication at 2.5 years of follow-up. : the implementation of threaded Steinmann pins was utilized in this case to stabilize a cemented metaphyseal cone in the revision of an infected total knee with significant tibial bone loss. The threaded property may help prevent migration of these pins in comparison to smooth pins. Creation of a stable platform in a revision total knee arthroplasty poses a substantial challenge in the context of significant bone loss, and our case depicts a good short-term outcome and another option for surgeons to consider before moving toward endoprostheses.
在翻修全膝关节置换术中,主要目标是通过重新接近解剖结构来重建和恢复接近正常的膝关节生物力学。胫骨骨量丢失对外科医生来说是一个挑战。骨水泥、同种异体骨、水泥内螺钉、干骺端套或锥、金属增材等是解决骨缺损的一些选择,对于最严重的病例,考虑使用假体近端胫骨置换。我们提出了一种新颖的使用带水泥的螺纹斯氏针来重建翻修膝关节置换术中大量胫骨干骺端皮质缺损的病例。一名 76 岁男性,根据 MSIS(肌肉骨骼感染学会)标准,患有感染性初次全膝关节置换术后,在膝关节确认无菌后,接受了标准的两期翻修全膝关节置换术。术中发现后内侧和干骺端胫骨大量骨丢失。为了避免胫骨近端置换和这些情况引起的伸肌机制并发症,再加上强制性腓肠肌瓣,在胫骨近端使用了一个干骺端锥,其周围有四个垂直螺纹斯氏针,间隔约 1 厘米,然后在骨水泥固定后与锥平齐切割,以重建胫骨皮质。患者的功能和活动范围继续改善,在 2.5 年的随访中没有结构并发症的证据。在这个病例中,我们使用螺纹斯氏针来稳定一个用水泥固定的干骺端锥,用于治疗感染性全膝关节置换术后胫骨大量骨丢失的病例。与光滑针相比,螺纹特性可能有助于防止这些针的迁移。在严重骨丢失的情况下,在翻修全膝关节置换术中创建一个稳定的平台是一个巨大的挑战,我们的病例描绘了一个良好的短期结果,并且为外科医生提供了另一种选择,在考虑使用内假体之前。