Dartmouth College, Hanover, New Hampshire.
J Bone Joint Surg Am. 2023 Feb 15;105(4):293-301. doi: 10.2106/JBJS.22.00571. Epub 2022 Nov 30.
Published analyses of never-irradiated, ethylene oxide (EtO)-sterilized tibial inserts and EtO- and gas plasma (GP)-sterilized acetabular ultra-high molecular weight polyethylene (UHMWPE) retrievals demonstrated minimal UHMWPE in vivo oxidation, whereas another analysis of EtO-sterilized acetabular liners found elevated oxidation linked with in vivo stresses. This study explored whether never-irradiated UHMWPE bearings are (1) oxidized by the in vivo environment, and (2) more likely to oxidize in higher-stress articulations (knee, ankle, shoulder).
An institutional review board-approved retrieval archive was queried for never-irradiated, EtO- and GP-sterilized UHMWPE bearings received at revision from 2001 to 2021. A total of 193 EtO-sterilized and 112 GP-sterilized conventional UHMWPE retrievals were analyzed (0 to 25 years in vivo; 133 hip, 144 knee, 18 ankle, and 10 shoulder). Retrieved implants were evaluated for in vivo damage and analyzed for trans-vinylene and ketone content by Fourier transform infrared spectroscopy (FTIR). Twelve never-implanted EtO-sterilized tibial knee inserts, (shelf-aged 5 to 19 years) were non-oxidized controls. Mechanical properties of 3 never-implanted and 3 retrieved tibial inserts were evaluated by ASTM Type-V uniaxial tensile testing. Statistical analyses evaluated correlations between time in vivo and oxidation, and compared mean oxidation rates by articulation.
Burnishing was the most common clinical damage for all articulations. Eight retrievals exhibited oxidation-related fatigue damage. All retrievals were validated as never-irradiated (median trans-vinylene index [TVI] = 0.000). Maximum ketone oxidation in retrievals correlated with in vivo time (p < 0.001). Thirty-seven percent of retrievals exhibited UHMWPE (subsurface) oxidation, most frequently ankle, knee, and glenoid inserts. Tensile properties differed between retrieved and never-implanted inserts, changing with oxidation. The oxidation rate differed significantly among the articulations (p < 0.001).
This study cohort confirmed the presence of in vivo oxidation in some non-irradiation-sterilized UHMWPE bearings, with higher-stress articulations (knee, ankle, shoulder) showing evidence of oxidation more frequently and having significantly higher oxidation rates than hips. Mechanical properties degraded by oxidation led to fatigue damage in 8 retrievals after a long duration in vivo.
Conventional EtO- or GP-sterilized UHMWPE bearings are at minimal risk for fatigue damage secondary to oxidation. However, higher stresses and longer time in vivo (more cycles of use) can lead to increased wear, oxidation, and fatigue damage.
对从未辐照、环氧乙烷(EtO)灭菌的胫骨插入物和 EtO 和气体等离子体(GP)灭菌的髋臼超高相对分子质量聚乙烯(UHMWPE)进行了分析,结果表明,体内 UHMWPE 氧化最小,而对 EtO 灭菌的髋臼衬垫的另一种分析发现,体内应力与氧化升高有关。本研究探讨了从未辐照的 UHMWPE 轴承是否存在:(1)体内环境氧化;(2)在高应力关节(膝关节、踝关节、肩关节)中更容易氧化。
对 2001 年至 2021 年因翻修而收到的从未辐照、EtO 和 GP 灭菌的 UHMWPE 轴承的机构审查委员会批准的检索档案进行了查询。分析了 193 个 EtO 灭菌和 112 个 GP 灭菌的常规 UHMWPE 回收物(体内 0 至 25 年;133 髋,144 膝,18 踝,10 肩)。对回收的植入物进行体内损伤评估,并通过傅里叶变换红外光谱法(FTIR)分析反式亚乙烯基和酮含量。12 个未植入的 EtO 灭菌胫骨膝关节插入物(货架老化 5 至 19 年)为非氧化对照。通过 ASTM 型-V 单轴拉伸试验评估了 3 个未植入和 3 个回收胫骨插入物的机械性能。统计分析评估了体内时间与氧化之间的相关性,并比较了各关节的平均氧化速率。
所有关节中最常见的临床损伤都是磨损。8 个回收物表现出与氧化相关的疲劳损伤。所有回收物均被确认为未辐照(中位数反式亚乙烯基指数[TVI] = 0.000)。回收物中最大酮氧化与体内时间相关(p <0.001)。37%的回收物出现 UHMWPE(次表面)氧化,最常见于踝关节、膝关节和肩胛盂植入物。拉伸性能在回收物和未植入物之间存在差异,随着氧化而变化。各关节的氧化速率差异显著(p <0.001)。
本研究队列证实了一些未经辐照灭菌的 UHMWPE 轴承存在体内氧化,高应力关节(膝关节、踝关节、肩关节)更频繁地出现氧化证据,氧化速率明显高于髋关节。氧化引起的机械性能退化导致 8 个回收物在体内长时间后发生疲劳损伤。
常规 EtO 或 GP 灭菌的 UHMWPE 轴承发生疲劳损伤的风险较低,这是由于氧化引起的。然而,更高的应力和更长的体内时间(更多的使用周期)会导致磨损、氧化和疲劳损伤增加。