Suppr超能文献

磁共振弹性成像(MRE)在动物模型中博来霉素诱导的肺纤维化中的应用。

Magnetic Resonance Elastography (MRE) of Bleomycin-Induced Pulmonary Fibrosis in an Animal Model.

机构信息

Davis Heart and Lung Research Institute, The Ohio State University, Columbus.

From the Department of Biomedical Engineering, The Ohio State University, Columbus.

出版信息

Invest Radiol. 2023 Apr 1;58(4):299-306. doi: 10.1097/RLI.0000000000000935. Epub 2022 Oct 25.

Abstract

BACKGROUND

Idiopathic pulmonary fibrosis is responsible for 40,000 deaths annually in the United States. A hallmark of idiopathic pulmonary fibrosis is elevated collagen deposition, which alters lung stiffness. Clinically relevant ways to measure changes in lung stiffness during pulmonary fibrosis are not available, and new noninvasive imaging methods are needed to measure changes in lung mechanical properties.

OBJECTIVES

Magnetic resonance elastography (MRE) is an in vivo magnetic resonance imaging technique proven to detect changes in shear stiffness in different organs. This study used MRE, histology, and bronchoalveolar lavage (BAL) to study changes in the mechanical and structural properties of the lungs after bleomycin-induced pulmonary fibrosis in pigs.

MATERIALS AND METHODS

Pulmonary fibrosis was induced in 9 Yorkshire pigs by intratracheal instillation of 2 doses of bleomycin into the right lung only. Magnetic resonance elastography scans were performed at baseline and week 4 and week 8 postsurgery in a 1.5 T magnetic resonance imaging scanner using a spin-echo echo planar imaging sequence to measure changes in lung shear stiffness. At the time of each scan, a BAL was performed. After the final scan, whole lung tissue was removed and analyzed for histological changes.

RESULTS

Mean MRE-derived stiffness measurements at baseline, week 4, and week 8 for the control (left) lungs were 1.02 ± 0.27 kPa, 0.86 ± 0.29 kPa, and 0.68 ± 0.20 kPa, respectively. The ratio of the shear stiffness in the injured (right) lung to the uninjured control (left) lung at baseline, week 4, and week 8 was 0.98 ± 0.23, 1.52 ± 0.41, and 1.64 ± 0.40, respectively. High-dose animals showed increased protein in BAL fluid, elevated inflammation observed by the presence of patchy filtrates, and enhanced collagen and α-smooth muscle actin staining on histological sections. Low-dose animals and the control (left) lungs of high-dose animals did not show significant histopathological changes.

CONCLUSION

This study demonstrated that MRE can be used to detect changes in lung stiffness in pigs after bleomycin challenge.

摘要

背景

特发性肺纤维化导致美国每年有 4 万人死亡。特发性肺纤维化的一个标志是胶原蛋白沉积增加,从而改变肺的僵硬程度。目前临床上还没有测量肺纤维化过程中肺僵硬度变化的方法,需要新的非侵入性成像方法来测量肺力学性质的变化。

目的

磁共振弹性成像(MRE)是一种体内磁共振成像技术,已被证明可以检测不同器官的剪切刚度变化。本研究使用 MRE、组织学和支气管肺泡灌洗(BAL)来研究博莱霉素诱导的猪肺纤维化后肺部力学和结构特性的变化。

材料和方法

通过气管内滴注博莱霉素到右肺,在 9 头约克夏猪中诱导肺纤维化。在 1.5T 磁共振成像扫描仪上使用自旋回波回波平面成像序列进行 MRE 扫描,以测量肺剪切刚度的变化,基线和术后 4 周和 8 周进行扫描。每次扫描时进行 BAL。最后一次扫描后,取出整个肺组织进行组织学分析。

结果

对照组(左)肺的基线、4 周和 8 周的平均 MRE 硬度测量值分别为 1.02±0.27kPa、0.86±0.29kPa 和 0.68±0.20kPa。基线、4 周和 8 周时,受伤(右)肺与未受伤对照组(左)肺的剪切刚度比值分别为 0.98±0.23、1.52±0.41 和 1.64±0.40。高剂量动物的 BAL 液中蛋白含量增加,存在斑片状滤过物提示炎症增加,组织切片上的胶原和α-平滑肌肌动蛋白染色增强。低剂量动物和高剂量动物的对照组(左)肺没有明显的组织病理学变化。

结论

本研究表明,MRE 可用于检测博莱霉素诱导的猪肺纤维化后肺僵硬度的变化。

相似文献

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验