Goetz Virginie, Gibot Pierre
Laboratoire des Nanomatériaux pour les Systèmes Sous Sollicitations Extrêmes (NS3E), ISL-CNRS-UNISTRA UMR 3208, Institut Franco-Allemand de Recherches de Saint Louis (ISL), 5 rue du Général Cassagnou, 68301 Saint Louis, France.
ACS Appl Mater Interfaces. 2023 Feb 22;15(7):9830-9840. doi: 10.1021/acsami.2c20700. Epub 2023 Feb 10.
Incidents can occur when handling energetic materials (EMs) due to their sensitivity to external stimuli. Mechanical (friction, impact) and electrical (electrostatic discharge (ESD)) stimuli can trigger involuntary ignition of EMs. Nanothermites, defined as highly reactive mixtures of a metal and a metal oxide, show interesting reactive properties (high temperature/amount of heat). However, their extreme sensitivity to ESD is a significant drawback in their development. With a sensitivity threshold of lower than a millijoule and considering the human body capacity discharge is a few tens of millijoules, the handling of such energetic mixtures is extremely hazardous. ESD desensitization is therefore of crucial importance for the use of these materials. To achieve this goal, polypyrrole (PPy) conductive polymer was used as an additive within an Al/SnO energetic formulation. This polymer is able to easily conduct the electrostatic charges, which is useful to avoid an ignition after a spark stimulus. PPy was added to the nanothermite through the elaboration of SnO-PPy composites. Delaying the SnO introduction time during pyrrole's polymerization ( = 0, 1, 24 h) changed the microstructures of the composites. The various SnO-PPy composites highlighted that the additive's distribution within the composite is a key component for the modulation of ESD sensitivity. For example, this threshold is higher for a nanothermite formulated with the composite elaborated at = 0 h (96.5 mJ with 7.5 vol % of polymer) than a composition based on the composite at = 24 h (16.9 mJ with 8.2 vol % of polymer). Meanwhile, the reactive properties are decreased. The loss of reactivity (e.g. combustion speed) was explained by the thermal insulating property of the additive. Overall, the aim of this study is to help in the understanding of ESD desensitization of nanothermites in order to make them safer for operators and adapted to the required applications.
由于含能材料(EMs)对外部刺激敏感,在处理过程中可能会发生事故。机械刺激(摩擦、撞击)和电刺激(静电放电(ESD))可引发含能材料的非自愿点火。纳米铝热剂定义为金属与金属氧化物的高反应性混合物,具有有趣的反应特性(高温/热量)。然而,它们对静电放电的极高敏感性是其发展中的一个重大缺点。其敏感度阈值低于一毫焦耳,考虑到人体的放电能力为几十毫焦耳,处理此类含能混合物极其危险。因此,静电放电脱敏对于这些材料的使用至关重要。为实现这一目标,聚吡咯(PPy)导电聚合物被用作Al/SnO含能配方中的添加剂。这种聚合物能够轻松传导静电荷,有助于避免火花刺激后起火。通过制备SnO-PPy复合材料,将PPy添加到纳米铝热剂中。在吡咯聚合过程中延迟SnO的引入时间(=0、1、24小时)会改变复合材料的微观结构。各种SnO-PPy复合材料表明,添加剂在复合材料中的分布是调节静电放电敏感度的关键因素。例如,用在=0小时制备的复合材料配制的纳米铝热剂的该阈值(含7.5体积%聚合物时为96.5 mJ)高于基于在=24小时制备的复合材料的组合物(含8.2体积%聚合物时为16.9 mJ)。同时,反应性能会降低。反应性的损失(如燃烧速度)可由添加剂的隔热性能来解释。总体而言,本研究的目的是帮助理解纳米铝热剂的静电放电脱敏,以便使其对操作人员更安全并适应所需应用。