Clinic of Rheumatology, Orthopaedics Traumatology and Reconstructive Surgery,Vilnius University, Faculty of Medicine, Vilnius, Lithuania.
Acta Orthop Traumatol Turc. 2023 Jan;57(1):40-45. doi: 10.5152/j.aott.2023.22045.
This study aimed to compare inter- and intra-observer agreement between radiographs with 2-dimensional and 3-dimensional computed tomography scans with and without 3-dimensional printed models in the evaluation of the distal radius fracture of Association for Osteo synth esis/ Ortho paedi c Trauma Association type C classification.
Fifteen consecutive cases with X-Rays, 2-dimensional and 3-dimensional computed tomography reconstructions views, and 3-dimensional printed models were selected. Three-dimensional printed models of the distal radius fractures were created using 2-dimensional computed tomography scan files in Digital Imaging and Communication in Medicine format, processed with the 3-dimensional Slicer software, and segmented, creating a 3-dimensional printed model in Standard Triangle Language format. Threedimensional models were printed using fused deposition modeling (FDM) type 3D printer Zortrax M200Plus using polylactic acid material on a scale of 1 : 1. Twenty observers were invited into the study.
Intra- and inter-observer reliability was analyzed using Fleiss' kappa statistics. Overall kappa values for both groups in interobserver agreement range from 0.113 to 0.283 and in intra-observer agreement from 0.25 to 0.545. Generally, inter-observer agreement increased with additional 3-dimensional printed models from slight to fair, and intra-observer agreement increased from fair to moderate. Surgeons' opinions about 3-dimensional printed models with Likert scale-type questions show positive overall results ranging from 8.3± 2.1 to 8.6 ± 1.4.
This study has shown that the inter- and intra-observer agreement with the addition of a 3-dimensional printed model for the evaluation of the distal radius fractures of Association For Osteo synth esis/ Ortho pedic Trauma Association C type for classification, fractures morphology, and preoperative planning tends to increase; however, improvements for an inter-observer agreement remain fair.
Level III Diagnostic Study.
本研究旨在比较 X 射线、二维和三维 CT 扫描以及有和没有三维打印模型的二维和三维 CT 扫描在评估桡骨远端骨折协会骨科创伤协会 C 型骨折中的二维和三维 CT 扫描的观察者间和观察者内一致性。
选择了 15 例连续的 X 射线、二维和三维 CT 重建视图以及三维打印模型的病例。使用二维 CT 扫描文件以 DICOM 格式创建三维打印模型,使用 3D Slicer 软件进行处理,并进行分段,以标准三角语言格式创建三维打印模型。使用 FDM 类型的 Zortrax M200Plus 3D 打印机,使用聚乳酸材料,以 1:1 的比例打印三维模型。邀请了 20 名观察者参与研究。
使用 Fleiss'kappa 统计分析进行了观察者内和观察者间可靠性分析。两组观察者间一致性的总体 Kappa 值范围为 0.113 至 0.283,观察者内一致性的总体 Kappa 值范围为 0.25 至 0.545。一般来说,随着额外的三维打印模型的增加,观察者间的一致性从轻微到适度增加,观察者内的一致性从适度到中度增加。使用 Likert 量表类型问题对三维打印模型的意见显示出积极的总体结果,范围从 8.3±2.1 到 8.6±1.4。
本研究表明,在评估桡骨远端骨折协会骨科创伤协会 C 型骨折分类、骨折形态和术前计划时,增加三维打印模型可提高观察者间和观察者内的一致性;然而,观察者间一致性的改善仍处于适度水平。
三级诊断研究。