Suppr超能文献

直接纤维增强桥修复下颌第一磨牙离体牙的抗疲劳性能——一项体外初步研究

Fatigue Resistance of Dissected Lower First Molars Restored with Direct Fiber-Reinforced Bridges-An In Vitro Pilot Study.

作者信息

Szabó Veronika T, Szabó Balázs, Barcsayné-Tátrai Noémi, Mészáros Csongor, Braunitzer Gábor, Szabó Balázs P, Lassila Lippo, Garoushi Sufyan, Fráter Márk

机构信息

Department of Operative and Esthetic Dentistry, Faculty of Dentistry, University of Szeged, H-6720 Szeged, Hungary.

Department of Periodontology, Faculty of Dentistry, University of Szeged, H-6720 Szeged, Hungary.

出版信息

Polymers (Basel). 2023 Mar 8;15(6):1343. doi: 10.3390/polym15061343.

Abstract

The aim of this research was to evaluate the mechanical impact of utilizing different fiber-reinforced composite (FRC) systems to reinforce inlay-retained bridges in dissected lower molars with different levels of periodontal support. A total of 24 lower first molars and 24 lower second premolars were included in this study. The distal canal of all molars received endodontic treatment. After root canal treatment, the teeth were dissected, and only the distal halves were kept. Standardized class II occluso-distal (OD) (premolars) and mesio-occlusal (MO) (dissected molars) cavities were prepared in all teeth, and premolar-molar units were created. The units were randomly distributed among four groups (n = six/group). With the aid of a transparent silicone index, direct inlay-retained composite bridges were fabricated. In Groups 1 and 2, both discontinuous (everX Flow) and continuous (everStick C&B) fibers were used for reinforcement, while in Groups 3 and 4, only discontinuous fibers (everX Flow) were used. The restored units were embedded in methacrylate resin, simulating either physiological periodontal conditions or furcation involvement. Subsequently, all units underwent fatigue survival testing in a cyclic loading machine until fracture, or a total of 40,000 cycles. Kaplan-Meyer survival analyses were conducted, followed by pairwise log-rank post hoc comparisons. Fracture patterns were evaluated visually and with scanning electron microscopy. In terms of survival, Group 2 performed significantly better than Groups 3 and 4 ( < 0.05), while there was no significant difference between the other groups. In the case of impaired periodontal support, a combination of both continuous and discontinuous short FRC systems increased the fatigue resistance of direct inlay-retained composite bridges compared to bridges that only contained short fibers. Such a difference was not found in the case of sound periodontal support between the two different bridges.

摘要

本研究的目的是评估使用不同纤维增强复合材料(FRC)系统对不同牙周支持水平的下颌磨牙进行嵌体固位桥修复时的力学影响。本研究共纳入24颗下颌第一磨牙和24颗下颌第二前磨牙。所有磨牙的远中根管均接受根管治疗。根管治疗后,将牙齿解剖,仅保留远中半部分。在所有牙齿上制备标准化的II类咬合远中(OD)(前磨牙)和近中咬合(MO)(解剖后的磨牙)洞型,并创建前磨牙-磨牙单位。这些单位随机分为四组(每组n = 6)。借助透明硅橡胶索引,制作直接嵌体固位复合桥。在第1组和第2组中,使用了间断(everX Flow)和连续(everStick C&B)纤维进行增强,而在第3组和第4组中,仅使用了间断纤维(everX Flow)。修复后的单位嵌入甲基丙烯酸酯树脂中,模拟生理牙周状况或根分叉病变。随后,所有单位在循环加载试验机中进行疲劳存活测试,直至断裂,或总共进行40,000次循环。进行Kaplan-Meyer存活分析,随后进行成对log-rank事后比较。通过肉眼和扫描电子显微镜评估骨折模式。在存活方面,第2组的表现明显优于第3组和第4组(<0.05),而其他组之间没有显著差异。在牙周支持受损的情况下,与仅包含短纤维的桥相比,连续和间断短FRC系统的组合增加了直接嵌体固位复合桥的抗疲劳性。在牙周支持良好的情况下,两种不同桥之间未发现这种差异。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f989/10053716/10c0edbd3825/polymers-15-01343-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验