Energy consumption and carbon footprint of 3D printing in pharmaceutical manufacture.

Achieving carbon neutrality is seen as an important goal in order to mitigate the effects of climate change, as carbon dioxide is a major greenhouse gas that contributes to global warming. Many countries, cities and organizations have set targets to become carbon neutral. The pharmaceutical sector is no exception, being a major contributor of carbon emissions (emitting approximately 55% more than the automotive sector for instance) and hence is in need of strategies to reduce its environmental impact. Three-dimensional (3D) printing is an advanced pharmaceutical fabrication technology that has the potential to replace traditional manufacturing tools. Being a new technology, the environmental impact of 3D printed medicines has not been investigated, which is a barrier to its uptake by the pharmaceutical industry. Here, the energy consumption (and carbon emission) of 3D printers is considered, focusing on technologies that have successfully been demonstrated to produce solid dosage forms. The energy consumption of 6 benchtop 3D printers was measured during standby mode and printing. On standby, energy consumption ranged from 0.03 to 0.17 kWh. The energy required for producing 10 printlets ranged from 0.06 to 3.08 kWh, with printers using high temperatures consuming more energy. Carbon emissions ranged between 11.60 and 112.16 g CO (eq) per 10 printlets, comparable with traditional tableting. Further analyses revealed that decreasing printing temperature was found to reduce the energy demand considerably, suggesting that developing formulations that are printable at lower temperatures can reduce CO emissions. The study delivers key initial insights into the environmental impact of a potentially transformative manufacturing technology and provides encouraging results in demonstrating that 3D printing can deliver quality medicines without being environmentally detrimental.