Departamento de Anatomía Humana, Medicina Legal e Historia de la Ciencia, Facultad de Medicina, Universidad de Málaga, 29071 Málaga, Spain.
Department of Chemistry and Environmental Sciences, New Jersey Institute of Technology, Tiernan Hall 365, Newark, NJ 07102, USA.
Int J Mol Sci. 2023 Apr 5;24(7):6793. doi: 10.3390/ijms24076793.
The postmortem interval (PMI) is difficult to estimate in later stages of decomposition. There is therefore a need to develop reliable methodologies to estimate late PMI. This study aims to assess whether there is a correlation between changes in the mineral composition of human teeth and the estimation of PMI. X-ray diffraction (XRD) and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy techniques were performed to address this challenge. Forty healthy human teeth obtained from odontological clinics were stored at different times (0, 10, 25, 50 years; N = 10/group). XRD and ATR-FTIR parameters related to the structure and composition of teeth were studied. Our results showed that the crystallinity index, crystal size index, mineral-to-organic matrix ratio (M/M) and carbonate/phosphate ratio (C/P) had the strongest association with PMI. For larger PMIs, there was a significant increase in crystallinity, crystal size and M/M ratio, while the C/P ratio showed a specific decrease with increasing PMI. According to our results, the parameters of crystallinity, crystal size, M/M ratio and C/P ratio can be considered highly accurate in determining a PMI of 10 years of data; crystallinity and mineral maturity can be considered useful in determining a PMI of 25 years; and crystallinity and mineral maturity can be considered highly accurate in determining a PMI of 50 years. A particular XRD index was identified as the most suitable parameter to estimate PMI: crystallinity. The joint use of XRD and ATR-FTIR analyses could be a promising alternative for dating human teeth.
死后间隔时间(PMI)在分解的后期阶段很难估计。因此,需要开发可靠的方法来估计晚期 PMI。本研究旨在评估人类牙齿矿物质成分的变化与 PMI 估计之间是否存在相关性。使用 X 射线衍射(XRD)和衰减全反射傅里叶变换红外(ATR-FTIR)光谱技术来解决这一挑战。从牙科诊所获得了 40 颗健康的人类牙齿,分别在不同的时间(0、10、25、50 年;每组 N=10)进行储存。研究了与牙齿结构和组成相关的 XRD 和 ATR-FTIR 参数。我们的结果表明,结晶度指数、晶体尺寸指数、矿物质-有机基质比(M/M)和碳酸盐/磷酸盐比(C/P)与 PMI 具有最强的相关性。对于较大的 PMI,结晶度、晶体尺寸和 M/M 比显著增加,而 C/P 比随着 PMI 的增加呈特定下降趋势。根据我们的结果,结晶度、晶体尺寸、M/M 比和 C/P 比等参数可用于准确确定 10 年数据的 PMI;结晶度和矿物成熟度可用于确定 25 年的 PMI;而结晶度和矿物成熟度可用于准确确定 50 年的 PMI。确定了一个特别的 XRD 指数作为估计 PMI 的最适合参数:结晶度。XRD 和 ATR-FTIR 分析的联合使用可能是一种有前途的人类牙齿定年替代方法。