Department of Dental Materials, National University of Medical Sciences (NUMS), Rawalpindi 46000, Pakistan.
Department of Pharmaceutics, College of Pharmacy, Jazan University, Jazan 45142, Saudi Arabia.
Molecules. 2023 Mar 31;28(7):3131. doi: 10.3390/molecules28073131.
The objective of this study was to synthesize a novel choline hydroxide ionic liquid-based tooth bleaching gel. Ionic liquid-based gels were synthesized and characterized using FTIR along with pH testing. Tooth sample preparation was carried out in line with ISO 28399:2020. The effects of synthesized gels on tooth samples were tested. Tooth samples were stained and grouped into three experimental groups: EAI (22% choline hydroxide gel), EAII (44% choline hydroxide gel), and EB (choline citrate gel) and two control groups: CA (commercial at-home 16% carbamide peroxide gel) and CB (deionized water). The tooth color analysis, which included shade matching with the Vitapan shade guide ( = 2), and digital colorimetric analysis ( = 2) were evaluated. The surface characteristics and hardness were analyzed with 3D optical profilometry, Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), and Microhardness testing ( = 3), respectively. The tooth color analysis (Vitapan shade guide) revealed that all the tooth samples treated with synthesized choline citrate gel (EB) showed an A1 shade as compared to the other four groups, giving a range of shades. An analysis of the ΔE values from digital colorimetry; EAI, EAII, CA, and CB showed ΔE values in a range that was clinically perceptible at a glance. However, EB showed the highest value of ΔE. The mean microhardness values for the five groups showed that the effects of three experimental gels i.e., 44% choline hydroxide, 22% choline hydroxide, and choline citrate, on the microhardness of the tooth samples were similar to that of the positive control, which comprised commercial at-home 16% carbamide peroxide gel. SEM with EDX of three tested subgroups was closely related in surface profile, elemental composition, and Ca/P ratio. The roughness average values from optical profilometry of four tested subgroups lie within approximately a similar range, showing a statistically insignificant difference ( > 0.05) between the tested subgroups. The synthesized novel experimental tooth bleaching gels displayed similar tooth bleaching actions without any deleterious effects on the surface characteristics and microhardness of the treated tooth samples when compared with the commercial at-home tooth bleaching gel.
本研究的目的是合成一种新型的胆碱氢氧化离子液体基牙齿美白凝胶。使用傅里叶变换红外光谱(FTIR)和 pH 测试对离子液体基凝胶进行了合成和表征。按照 ISO 28399:2020 进行了牙齿样本制备。测试了合成凝胶对牙齿样本的影响。将牙齿样本染色并分为三个实验组:EAI(22%胆碱氢氧化凝胶)、EAII(44%胆碱氢氧化凝胶)和 EB(胆碱柠檬酸盐凝胶)和两个对照组:CA(市售家用 16%过氧脲凝胶)和 CB(去离子水)。使用 Vitapan 比色指南( = 2)和数字比色分析( = 2)评估了牙齿颜色分析。使用三维光学轮廓仪、扫描电子显微镜(SEM)、能量色散 X 射线光谱(EDX)和显微硬度测试( = 3)分别分析了表面特性和硬度。牙齿颜色分析(Vitapan 比色指南)显示,与其他四组相比,用合成的胆碱柠檬酸盐凝胶(EB)处理的所有牙齿样本均显示 A1 色调,呈现出一系列色调。从数字比色分析中分析 ΔE 值;EAI、EAII、CA 和 CB 显示出在临床可察觉的范围内的 ΔE 值。然而,EB 显示出最高的 ΔE 值。五个组的平均显微硬度值表明,三种实验性凝胶(44%胆碱氢氧化、22%胆碱氢氧化和胆碱柠檬酸盐)对牙齿样本显微硬度的影响与包含市售家用 16%过氧脲凝胶的阳性对照相似。三个测试亚组的 SEM 和 EDX 在表面轮廓、元素组成和 Ca/P 比方面非常相似。四个测试亚组的光学轮廓仪的粗糙度平均值在大约相似的范围内,表明测试亚组之间没有统计学上的显著差异( > 0.05)。与市售家用牙齿美白凝胶相比,合成的新型实验性牙齿美白凝胶在对处理后的牙齿样本的表面特性和显微硬度没有任何有害影响的情况下,表现出相似的牙齿美白作用。