Suppr超能文献

土壤可生物降解和不可生物降解塑料薄膜的物理特性影响灰葡萄孢菌分生孢子的飞溅传播。

Physical characteristics of soil-biodegradable and nonbiodegradable plastic mulches impact conidial splash dispersal of Botrytis cinerea.

机构信息

Department of Horticulture, Washington State University, Northwestern Washington Research and Extension Center, Mount Vernon, Washington, United States of America.

Department of Plant Pathology, Washington State University, Northwestern Washington Research and Extension Center, Mount Vernon, Washington, United States of America.

出版信息

PLoS One. 2023 May 8;18(5):e0285094. doi: 10.1371/journal.pone.0285094. eCollection 2023.

Abstract

Botrytis cinerea causes gray mold disease of strawberry (Fragaria ×ananassa) and is a globally important pathogen that causes fruit rot both in the field and after harvest. Commercial strawberry production involves the use of plastic mulches made from non-degradable polyethylene (PE), with weedmat made from woven PE and soil-biodegradable plastic mulch (BDM) as emerging mulch technologies that may enhance sustainable production. Little is known regarding how these plastic mulches impact splash dispersal of B. cinerea conidia. The objective of this study was to investigate splash dispersal dynamics of B. cinerea when exposed to various plastic mulch surfaces. Mulch surface physical characteristics and conidial splash dispersal patterns were evaluated for the three mulches. Micrographs revealed different surface characteristics that have the potential to influence splash dispersal: PE had a flat, smooth surface, whereas weedmat had large ridges and BDM had an embossed surface. Both PE mulch and BDM were impermeable to water whereas weedmat was semi-permeable. Results generated using an enclosed rain simulator system showed that as the horizontal distance from the inoculum source increased, the number of splash dispersed B. cinerea conidia captured per plate decreased for all mulch treatments. More than 50% and approximately 80% of the total number of dispersed conidia were found on plates 10 and 16 cm away from the inoculum source across all treatments, respectively. A significant correlation between the total and germinated conidia on plates across all mulch treatments was detected (P<0.01). Irrespective of distance from the inoculum source, embossed BDM facilitated higher total and germinated splashed conidia (P<0.001) compared to PE mulch and weedmat (P = 0.43 and P = 0.23, respectively), indicating BDM's or embossed film's potential for enhancing B. cinerea inoculum availability in strawberry production under plasticulture. However, differences in conidial concentrations observed among treatments were low and may not be pathologically relevant.

摘要

灰葡萄孢引起草莓(Fragaria ×ananassa)灰霉病,是一种全球性的重要病原体,可导致田间和采后果实腐烂。商业草莓生产涉及使用不可降解聚乙烯(PE)制成的塑料地膜,而由编织 PE 制成的防草布和可生物降解塑料地膜(BDM)是新兴的地膜技术,可能有助于可持续生产。对于这些塑料地膜如何影响灰葡萄孢分生孢子的飞溅传播,人们知之甚少。本研究的目的是研究不同塑料地膜表面暴露下灰葡萄孢分生孢子的飞溅传播动态。评估了三种地膜的地膜表面物理特性和分生孢子飞溅传播模式。显微镜照片显示了不同的表面特征,这些特征有可能影响飞溅传播:PE 具有平坦、光滑的表面,而防草布具有较大的脊,BDM 具有压花表面。PE 地膜和 BDM 对地膜不透水,而防草布则是半透的。使用封闭的雨水模拟器系统生成的结果表明,随着距接种源水平距离的增加,在所有地膜处理中,每板捕获的飞溅分散的灰葡萄孢分生孢子数量减少。在所有处理中,超过 50%和大约 80%的总分散分生孢子分别位于距接种源 10 和 16 厘米的平板上。在所有地膜处理中,平板上总分生孢子和萌发分生孢子之间存在显著相关性(P<0.01)。无论距接种源的距离如何,压花 BDM 比 PE 地膜和防草布更有利于总分生孢子和萌发的飞溅分生孢子(P<0.001)(P=0.43 和 P=0.23),这表明 BDM 或压花膜在塑料栽培下提高草莓生产中灰葡萄孢接种剂的可用性的潜力。然而,观察到处理之间的分生孢子浓度差异较小,且可能与病理学无关。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/1b75/10166481/13b5c73c7b40/pone.0285094.g002.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验