Indurkar Abhishek, Choudhary Rajan, Rubenis Kristaps, Nimbalkar Mansingraj, Sarakovskis Anatolijs, Boccaccini Aldo R, Locs Janis
Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka Street 3, LV-1007 Riga, Latvia.
Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Kipsalas Street 6A, LV-1048 Riga, Latvia.
ACS Omega. 2023 Jul 17;8(30):26782-26792. doi: 10.1021/acsomega.3c00796. eCollection 2023 Aug 1.
Amorphous calcium phosphate (ACP) is the first solid phase precipitated from a supersaturated calcium phosphate solution. Naturally, ACP is formed during the initial stages of biomineralization and stabilized by an organic compound. Carboxylic groups containing organic compounds are known to regulate the nucleation and crystallization of hydroxyapatite. Therefore, from a biomimetic point of view, the synthesis of carboxylate ions containing ACP (ACPC) is valuable. Usually, ACP is synthesized with fewer steps than ACPC. The precipitation reaction of ACP is rapid and influenced by pH, temperature, precursor concentration, stirring conditions, and reaction time. Due to phosphates triprotic nature, controlling pH in a multistep approach becomes tedious. Here, we developed a new ACP and ACPC synthesis approach and thoroughly characterized the obtained materials. Results from vibration spectroscopy, nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), true density, specific surface area, and ion release studies have shown a difference in the physiochemical properties of the ACP and ACPC. Additionally, the effect of a carboxylic ion type on the physiochemical properties of ACPC was characterized. All of the ACPs and ACPCs were synthesized in sterile conditions, and in vitro analysis was performed using MC-3T3E1 cells, revealing the cytocompatibility of the synthesized ACPs and ACPCs, of which the ACPC synthesized with citrate showed the highest cell viability.
无定形磷酸钙(ACP)是从过饱和磷酸钙溶液中沉淀出的首个固相。自然情况下,ACP在生物矿化的初始阶段形成,并由有机化合物稳定。已知含羧基的有机化合物可调节羟基磷灰石的成核和结晶。因此,从仿生学角度来看,合成含羧酸盐离子的ACP(ACPC)具有重要价值。通常,合成ACP的步骤比合成ACPC的步骤少。ACP的沉淀反应迅速,受pH值、温度、前驱体浓度、搅拌条件和反应时间的影响。由于磷酸盐的三元性质,通过多步方法控制pH值变得繁琐。在此,我们开发了一种新的ACP和ACPC合成方法,并对所得材料进行了全面表征。振动光谱、核磁共振(NMR)、X射线光电子能谱(XPS)、真密度、比表面积和离子释放研究的结果表明,ACP和ACPC的物理化学性质存在差异。此外,还表征了羧酸离子类型对ACPC物理化学性质的影响。所有的ACP和ACPC均在无菌条件下合成,并使用MC-3T3E1细胞进行体外分析,揭示了合成的ACP和ACPC的细胞相容性,其中用柠檬酸盐合成的ACPC显示出最高的细胞活力。