Brown Helen K, El Haskouri Jamal, Marcos María D, Ros-Lis José Vicente, Amorós Pedro, Úbeda Picot M Ángeles, Pérez-Pla Francisco
Institut de Ciència dels Materials (ICMUV), c/Catedrático José Beltrán 2, Paterna, 46980 Valencia, Spain.
Centro de Reconocimiento Molecular y Desarrollo Tecnológico (IDM), Unidad Mixta Universitat Politècnica de València-Universitat de València, Departamento de Química, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia, Spain.
Nanomaterials (Basel). 2023 Jul 25;13(15):2162. doi: 10.3390/nano13152162.
This work reports on the synthesis of nine materials containing Cu, Ag, Au, and Ag/Cu nanoparticles (NPs) deposited on magnetite particles coated with polydopamine (PDA). Ag NPs were deposited on two PDA@Fe3O4 supports differing in the thickness of the PDA film. The film thickness was adjusted to impart a textural porosity to the material. During synthesis, Ag(I) was reduced with ascorbic acid (HA), photochemically, or with NaBH4, whereas Au(III), with HA, with the PDA cathecol groups, or NaBH4. For the material characterization, TGA, XRD, SEM, EDX, TEM, STEM-HAADF, and DLS were used. The catalytic activity towards reduction of 4-, 3- and 2-nitrophenol was tested and correlated with the synthesis method, film thickness, metal particle size and NO2 group position. An evaluation of the recyclability of the materials was carried out. In general, the catalysts prepared by using soft reducing agents and/or thin PDA films were the most active, while the materials reduced with NaBH4 remained unchanged longer in the reactor. The activity varied in the direction Au > Ag > Cu. However, the Ag-based materials showed a higher recyclability than those based on gold. It is worth noting that the Cu-containing catalyst, the most environmentally friendly, was as active as the best Ag-based catalyst.
本工作报道了九种材料的合成,这些材料包含沉积在涂有聚多巴胺(PDA)的磁铁矿颗粒上的铜、银、金和银/铜纳米颗粒(NPs)。银纳米颗粒沉积在两种PDA膜厚度不同的PDA@Fe3O4载体上。调整膜厚度以赋予材料结构孔隙率。在合成过程中,Ag(I)用抗坏血酸(HA)、通过光化学方法或用硼氢化钠还原,而Au(III)则用HA、与PDA儿茶酚基团或硼氢化钠还原。为了进行材料表征,使用了热重分析(TGA)、X射线衍射(XRD)、扫描电子显微镜(SEM)、能谱分析(EDX)、透射电子显微镜(TEM)、扫描透射电子显微镜-高角度环形暗场成像(STEM-HAADF)和动态光散射(DLS)。测试了对4-、3-和2-硝基苯酚还原的催化活性,并将其与合成方法、膜厚度、金属颗粒尺寸和硝基位置相关联。对材料的可回收性进行了评估。一般来说,使用软还原剂和/或薄PDA膜制备的催化剂活性最高,而用硼氢化钠还原的材料在反应器中保持不变的时间更长。活性按Au>Ag>Cu的方向变化。然而,银基材料比金基材料显示出更高的可回收性。值得注意的是,最环保的含铜催化剂与最佳银基催化剂活性相当。