Kumar Shalendra, Ahmed Faheem, Shaalan Nagih M, Arshi Nishat, Dalela Saurabh, Chae Keun Hwa
Department of Physics, College of Science, King Faisal University, P.O. Box 400, Al-Ahsa 31982, Saudi Arabia.
Department of Physics, University of Petroleum & Energy Studies, Dehradun 248007, India.
Nanomaterials (Basel). 2023 Jul 31;13(15):2222. doi: 10.3390/nano13152222.
ZnO is a potential candidate for providing an economic and environmentally friendly substitute for energy storage materials. Therefore, in this work, Fe-doped ZnO nanostructures prepared using the microwave irradiation procedure were investigated for structural, morphological, magnetic, electronic structural, specific surface area and electrochemical properties to be used as electrodes for supercapacitors. The X-ray diffraction, high-resolution transmission electron microscopy images, and selective-area electron diffraction pattern indicated that the nanocrystalline structures of Fe-doped ZnO were found to possess a hexagonal wurtzite structure. The effect of Fe doping in the ZnO matrix was observed on the lattice parameters, which were found to increase with the dopant concentration. Rods and a nanosheet-like morphology were observed via FESEM images. The ferromagnetic nature of samples is associated with the presence of bound magnetic polarons. The enhancement of saturation magnetization was observed due to Fe doping up to 3% in correspondence with the increase in the number of bound magnetic polarons with an Fe content of up to 3%. This behavior is observed as a result of the change in the oxidation state from +2 to +3, which was a consequence of Fe doping ranging from 3% to 5%. The electrode performance of Fe-doped ZnO nanostructures was studied using electrochemical measurements. The cyclic voltammetry (CV) results inferred that the specific capacitance increased with Fe doping and displayed a high specific capacitance of 286 F·g at 10 mV/s for 3% Fe-doped ZnO nanostructures and decreased beyond that. Furthermore, the stability of the ZnFeO electrode, which was examined by performing 2000 cycles, showed excellent cyclic stability (85.0% of value retained up to 2000 cycles) with the highest specific capacitance of 276.4 F·g, signifying its appropriateness as an electrode for energy storage applications.
氧化锌是一种有潜力的材料,可作为储能材料的经济且环保的替代品。因此,在本工作中,对采用微波辐照法制备的铁掺杂氧化锌纳米结构进行了结构、形态、磁性、电子结构、比表面积和电化学性能的研究,以用作超级电容器的电极。X射线衍射、高分辨率透射电子显微镜图像和选区电子衍射图谱表明,铁掺杂氧化锌的纳米晶体结构为六方纤锌矿结构。观察到铁掺杂到氧化锌基体中对晶格参数有影响,发现晶格参数随掺杂剂浓度增加而增大。通过场发射扫描电子显微镜图像观察到棒状和纳米片状形态。样品的铁磁性质与束缚磁极化子的存在有关。观察到由于铁掺杂量高达3%,饱和磁化强度增强,这与铁含量高达3%时束缚磁极化子数量的增加相对应。这种行为是由于氧化态从+2变为+3导致的,这是3%至5%铁掺杂的结果。使用电化学测量研究了铁掺杂氧化锌纳米结构的电极性能。循环伏安法(CV)结果推断,比电容随铁掺杂增加而增大,对于3%铁掺杂的氧化锌纳米结构,在10 mV/s时显示出286 F·g的高比电容,超过该掺杂量后比电容降低。此外,通过进行2000次循环对ZnFeO电极稳定性进行检测,结果表明其具有优异的循环稳定性(在2000次循环后保留85.0%的值),最高比电容为276.4 F·g,表明其适合作为储能应用的电极。