Drosou Catherine, Nikolaraki Ersi, Georgakopoulou Theodora, Fanourgiakis Sotiris, Zaspalis Vassilios T, Yentekakis Ioannis V
Laboratory of Physical Chemistry and Chemical Processes, School of Chemical and Environmental Engineering, Technical University of Crete, 731 00 Chania, Crete, Greece.
Department of Chemical Engineering, Aristotle University of Thessaloniki, 541 24 Thessaloniki, Greece.
Nanomaterials (Basel). 2023 Aug 7;13(15):2271. doi: 10.3390/nano13152271.
The increasing use of natural gas as an efficient, reliable, affordable, and cleaner energy source, compared with other fossil fuels, has brought the catalytic CH complete oxidation reaction into the spotlight as a simple and economic way to control the amount of unconverted methane escaping into the atmosphere. CH emissions are a major contributor to the 'greenhouse effect', and therefore, they need to be effectively reduced. Catalytic CH oxidation is a promising method that can be used for this purpose. Detailed studies of the activity, oxidative thermal aging, and the time-on-stream (TOS) stability of pristine LaSrMnO perovskites (LSM; X = % substitution of La with Sr = 0, 30, 50 and 70%) and iridium-loaded Ir/LaSrMnO (Ir/LSM) perovskite catalysts were conducted in a temperature range of 400-970 °C to achieve complete methane oxidation under excess oxygen (lean) conditions. The effect of X on the properties of the perovskites, and thus, their catalytic performance during heating/cooling cycles, was studied using samples that were subjected to various pretreatment conditions in order to gain an in-depth understanding of the structure-activity/stability correlations. Large (up to ca. 300 °C in terms of T) inverted volcano-type differences in catalytic activity were found as a function of X, with the most active catalysts being those where X = 0%, and the least active were those where X = 50%. Inverse hysteresis phenomena (steady-state rate multiplicities) were revealed in heating/cooling cycles under reaction conditions, the occurrence of which was found to depend strongly on the employed catalyst pre-treatment (pre-reduction or pre-oxidation), while their shape and the loop amplitude were found to depend on X and the presence of Ir. All findings were consistently interpreted, which involved a two-term mechanistic model that utilized the synergy of Eley-Rideal and Mars-van Krevelen kinetics.
与其他化石燃料相比,天然气作为一种高效、可靠、经济且更清洁的能源,其使用量不断增加,这使得催化CH完全氧化反应成为一种控制未转化甲烷排放到大气中的简单且经济的方法,从而备受关注。CH排放是“温室效应”的主要贡献者,因此,需要有效减少CH排放。催化CH氧化是一种有前景的可用于此目的的方法。对原始LaSrMnO钙钛矿(LSM;X = La被Sr取代的百分比 = 0、30、50和70%)和负载铱的Ir/LaSrMnO(Ir/LSM)钙钛矿催化剂在400 - 970 °C温度范围内的活性、氧化热老化和在线(TOS)稳定性进行了详细研究,以在过量氧气(贫氧)条件下实现甲烷的完全氧化。使用经过各种预处理条件的样品研究了X对钙钛矿性质的影响,进而研究了其在加热/冷却循环过程中的催化性能,以便深入了解结构 - 活性/稳定性之间的关系。发现催化活性随X呈现出大的(高达约300 °C,以T计)倒火山型差异,其中活性最高的催化剂是X = 0%的那些,活性最低的是X = 50%的那些。在反应条件下的加热/冷却循环中揭示了逆滞后现象(稳态速率多重性),发现其出现强烈依赖于所采用的催化剂预处理(预还原或预氧化),而其形状和环幅度则依赖于X和Ir的存在。所有研究结果都得到了一致的解释,这涉及一个利用埃利 - 里德耳和马斯 - 范克雷维伦动力学协同作用的双项机理模型。