Polché Mackenson, José Miguel Blancas Flores, Guzmán González Carlos Alberto, González Contreras Gabriel, Romero Arellano Victor Hugo
Departamento de Agua y Energía, CUTonalá, Universidad de Guadalajara, Av. Nuevo Periférico No. 555 Ejido San José Tateposco, Tonalá 45425, Mexico.
Departamento de Ciencias Básicas y Aplicadas, CUTonalá, Universidad de Guadalajara Av. Nuevo Periférico No. 555 Ejido San José Tateposco, Tonalá 45425, Mexico.
Nanomaterials (Basel). 2023 Sep 2;13(17):2480. doi: 10.3390/nano13172480.
Luminescent solar concentrators (LSCs) have become an attractive way to produce green energy via their integration into buildings as photovoltaic windows. Recently, carbon quantum dots (C-QDs) have become the most studied luminescent material for the manufacture of luminescent solar concentrators due to their advantages, such as low toxicity, sustainability, and low cost. Despite the advantages of carbon quantum dots, they remain a low-efficiency material, and it is difficult to fabricate LSCs with a good performance. To address this problem, some of the research has used SiO nanoparticles (Nps) to produce a light-scattering effect that helps to improve the system performance. However, these studies are limited and have not been discussed in detail. In this regard, this research work was designed to evaluate the contribution of the scattering effect in different systems of carbon quantum dots used in a possible luminescent solar concentrator. To carry out this study, C-QDs and SiO Nps were synthesized by hydrothermal methods and the Stober method, respectively. We used different concentrations of both materials to fabricate film LSCs (10 × 10 cm). The results show that the light scattered by the SiO Nps has a double contribution, in terms of light redirected towards the edges of the window and as a secondary source of excitation for the C-QDs; thus, an improvement in the performance of the LSC is achieved. The best improvement in photoluminescence is achieved when the films are composed of 20% wt carbon quantum dots and 10% wt SiO Nps, reaching a gain of 16% of the intensity of the light incident on the edges of the window with respect to the LSCs where only C-QDs were used.
发光太阳能聚光器(LSCs)通过集成到建筑物中作为光伏窗户,已成为一种颇具吸引力的绿色能源生产方式。近来,碳量子点(C-QDs)因其低毒性、可持续性和低成本等优势,成为制造发光太阳能聚光器研究最多的发光材料。尽管碳量子点具有诸多优点,但它们仍是一种低效率材料,难以制造出性能良好的LSCs。为解决这一问题,一些研究使用了SiO纳米颗粒(Nps)来产生光散射效应,以帮助提高系统性能。然而,这些研究较为有限,且尚未进行详细讨论。在这方面,本研究工作旨在评估在可能的发光太阳能聚光器中使用的不同碳量子点体系中散射效应的贡献。为开展此项研究,分别采用水热法和Stober法合成了C-QDs和SiO Nps。我们使用不同浓度的这两种材料来制备薄膜LSCs(10×10厘米)。结果表明,SiO Nps散射的光具有双重作用,一方面将光重定向到窗户边缘,另一方面作为C-QDs的二次激发源;从而实现了LSC性能的提升。当薄膜由20%重量的碳量子点和10%重量的SiO Nps组成时,光致发光得到了最佳改善,相对于仅使用C-QDs的LSCs,入射到窗户边缘的光强度增益达到了16%。