Institute of Manufacturing and Materials Technology, Faculty of Mechanical Engineering and Ship Technology, Gdańsk University of Technology, Gdańsk, Poland.
Department of Laboratory Medicine, Medical University of Gdańsk, Gdańsk, Poland.
J Biomed Mater Res B Appl Biomater. 2024 Jan;112(1):e35332. doi: 10.1002/jbm.b.35332. Epub 2023 Sep 20.
The development of novel implants subjected to surface modification to achieve high osteointegration properties at simultaneous antimicrobial activity is a highly current problem. This study involved different surface treatments of titanium surface, mainly by electrochemical oxidation to produce a nanotubular oxide layer (TNTs), a subsequent electrochemical reduction of silver nitrate and decoration of a nanotubular surface with silver nanoparticles (AgNPs), and finally electrophoretic deposition (EPD) of a composite of chitosan (CS) and either polymethacrylate-based copolymer Eudragit E 100 (EE100) or poly(4-vinylpyridine) (P4VP) coating. The effects of each stage of this multi-step modification were examined in terms of morphology, roughness, wettability, corrosion resistance, coating-substrate adhesion, antibacterial properties, and osteoblast cell adhesion and proliferation. The results showed that the titanium surface formed nanotubes (inner diameter of 97 ± 12 nm, length of 342 ± 36 nm) subsequently covered with silver nanoparticles (with a diameter of 88 ± 8 nm). Further, the silver-decorated nanotubes were tightly coated with biopolymer films. Most of the applied modifications increased both the roughness and the surface contact angle of the samples. The deposition of biopolymer coatings resulted in reduced burst release of silver. The coated samples revealed potent antimicrobial activity against both Gram-positive and Gram-negative bacteria. Total elimination (99.9%) of E. coli was recorded for a sample with CS/P4VP coating. Cytotoxicity results using hFOB 1.19, a human osteoblast cell line, showed that after 3 days the tested modifications did not affect the cellular growth according to the titanium control. The proposed innovative multilayer antibacterial coatings can be successful for titanium implants as effective postoperative anti-inflammation protection.
新型植入物的开发需要进行表面改性,以实现高骨整合性能和同时具有抗菌活性,这是一个当前非常热门的问题。本研究涉及对钛表面进行不同的表面处理,主要通过电化学氧化生成纳米管状氧化层(TNTs),随后电化学还原硝酸银并在纳米管表面装饰纳米银颗粒(AgNPs),最后通过电泳沉积(EPD)将壳聚糖(CS)与基于甲基丙烯酸乙酯的共聚物 Eudragit E 100(EE100)或聚 4-乙烯基吡啶(P4VP)涂层的复合材料。从形态、粗糙度、润湿性、耐腐蚀性、涂层-基底附着力、抗菌性能以及成骨细胞黏附和增殖等方面,考察了这种多步改性的各个阶段的效果。结果表明,钛表面形成了纳米管(内径 97±12nm,长度 342±36nm),随后纳米管表面覆盖了银纳米颗粒(直径 88±8nm)。此外,银修饰的纳米管被生物聚合物膜紧密地包裹。大多数应用的改性方法都提高了样品的粗糙度和表面接触角。生物聚合物涂层的沉积减少了银的突释释放。涂覆的样品对革兰氏阳性菌和革兰氏阴性菌均表现出强大的抗菌活性。CS/P4VP 涂层的样品对大肠杆菌的完全杀灭率(99.9%)。用 hFOB 1.19(人成骨细胞系)进行的细胞毒性试验结果表明,在第 3 天,根据钛对照,测试的改性方法不影响细胞生长。所提出的创新多层抗菌涂层可成功应用于钛植入物,作为有效的术后抗炎保护。