Suppr超能文献

凝胶与屈服液体的流变学

Rheology of Gels and Yielding Liquids.

作者信息

Malkin Alexander Ya, Derkach Svetlana R, Kulichikhin Valery G

机构信息

A.V. Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences, Leninskii Prosp. 29, 119991 Moscow, Russia.

Laboratory of Chemistry and Technology of Marine Bioresources, Institute of Natural Science and Technology, Murmansk State Technical University, 183010 Murmansk, Russia.

出版信息

Gels. 2023 Sep 3;9(9):715. doi: 10.3390/gels9090715.

Abstract

In this review, today's state of the art in the rheology of gels and transition through the yield stress of yielding liquids is discussed. Gels are understood as soft viscoelastic multicomponent solids that are in the incomplete phase separation state, which, under the action of external mechanical forces, do not transit into a fluid state but rupture like any solid material. Gels can "melt" (again, like any solids) due to a change in temperature or variation in the environment. In contrast to this type of rheology, yielding liquids (sometimes not rigorously referred to as "gels", especially in relation to colloids) can exist in a solid-like (gel-like) state and become fluid above some defined stress and time conditions (yield stress). At low stresses, their behavior is quite similar to that of permanent solid gels, including the frequency-independent storage modulus. The gel-to-sol transition considered in colloid chemistry is treated as a case of yielding. However, in many cases, the yield stress cannot be assumed to be a physical parameter since the solid-to-liquid transition happens in time and is associated with thixotropic effects. In this review, special attention is paid to various time effects. It is also stressed that plasticity is not equivalent to flow since (irreversible) plastic deformations are determined by stress but do not continue over time. We also discuss some typical errors, difficulties, and wrong interpretations of experimental data in studies of yielding liquids.

摘要

在本综述中,我们讨论了凝胶流变学的当前技术水平以及屈服液体通过屈服应力的转变。凝胶被理解为处于不完全相分离状态的软粘弹性多组分固体,在外部机械力的作用下,它们不会转变为流体状态,而是像任何固体材料一样破裂。凝胶可以由于温度变化或环境变化而“熔化”(同样,像任何固体一样)。与这种流变学类型不同,屈服液体(有时在严格意义上不称为“凝胶”,特别是在与胶体相关的情况下)可以以类固体(类凝胶)状态存在,并在某些定义的应力和时间条件(屈服应力)以上变为流体。在低应力下,它们的行为与永久固体凝胶非常相似,包括与频率无关的储能模量。胶体化学中考虑的凝胶 - 溶胶转变被视为屈服的一种情况。然而,在许多情况下,屈服应力不能被认为是一个物理参数,因为固 - 液转变是随时间发生的,并且与触变效应相关。在本综述中,特别关注了各种时间效应。还强调了可塑性不等同于流动,因为(不可逆的)塑性变形由应力决定,但不会随时间持续。我们还讨论了屈服液体研究中实验数据的一些典型错误、困难和错误解释。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/efaf/10529254/a59c52bed513/gels-09-00715-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验