Suppr超能文献

弱凝胶和强凝胶以及非晶态固体状态的出现。

Weak and Strong Gels and the Emergence of the Amorphous Solid State.

作者信息

Douglas Jack F

机构信息

Materials Science and Engineering Division, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA.

出版信息

Gels. 2018 Feb 23;4(1):19. doi: 10.3390/gels4010019.

Abstract

Gels are amorphous solids whose macroscopic viscoelastic response derives from constraints in the material that serve to localize the constituent molecules or particles about their average positions in space. These constraints may either be local in nature, as in chemical cross-linking and direct physical associations, or non-local, as in case of topological "entanglement" interactions between highly extended fiber or sheet structures in the fluid. Either of these interactions, or both combined, can lead to "gelation" or "amorphous solidification". While gels are often considered to be inherently non-equilibrium materials, and correspondingly termed "soft glassy matter", this is not generally the case. For example, the formation of vulcanized rubbers by cross-linking macromolecules can be exactly described as a second order phase transition from an equilibrium fluid to an equilibrium solid state, and amorphous solidification also arises in diverse physical gels in which molecular and particle localization occurs predominantly through transient molecuar associations, or even topological interactions. As equilibrium, or near equilibrium systems, such gels can be expected to exhibit universal linear and non-linear viscoelastic properties, especially near the "critical" conditions at which the gel state first emerges. In particular, a power-law viscoelastic response is frequently observed in gel materials near their "gelation" or "amorphous solidification" transition. Another basic property of physical gels of both theoretical and practical interest is their response to large stresses at constant shear rate or under a fixed macrocopic strain. In particular, these materials are often quite sensitive to applied stresses that can cause the self-assembled structure to progressively break down under flow or deformation. This disintegration of gel structure can lead to "yield" of the gel material, i.e., a fluidization transition, followed by shear thinning of the resulting heterogeneous "jelly-like" fluid. When the stress is removed, however, the material can relax back to its former equilibrium gel state, i.e., gel rejuvenation. In constrast, a non-equilibrium material will simply change its form and properties in a way that depends on processing history. Physical gels are thus unique self-healing materials in which the existence of equilibrium ensures their eventual recovery. The existence of equilibrium also has implications for the nature of both the linear and non-linear rheological response of gel materials, and the present paper explores this phenomenon based on simple scaling arguments of the kind frequently used in describing phase transitions and the properties of polymer solutions.

摘要

凝胶是无定形固体,其宏观粘弹性响应源于材料中的约束,这些约束使组成分子或颗粒在空间中的平均位置附近局部化。这些约束在性质上可以是局部的,如化学交联和直接物理缔合,也可以是非局部的,如流体中高度伸展的纤维或片层结构之间的拓扑“缠结”相互作用。这些相互作用中的任何一种,或两者结合,都可导致“凝胶化”或“无定形固化”。虽然凝胶通常被认为是固有的非平衡材料,并相应地被称为“软玻璃态物质”,但一般情况并非如此。例如,通过大分子交联形成硫化橡胶可以精确地描述为从平衡流体到平衡固态的二级相变,并且在各种物理凝胶中也会出现无定形固化,其中分子和颗粒的局部化主要通过瞬态分子缔合甚至拓扑相互作用发生。作为平衡或近平衡系统,预计此类凝胶会表现出普遍的线性和非线性粘弹性特性,尤其是在凝胶态首次出现的“临界”条件附近。特别地,在凝胶材料接近其“凝胶化”或“无定形固化”转变时,经常观察到幂律粘弹性响应。物理凝胶的另一个具有理论和实际意义的基本特性是它们在恒定剪切速率或固定宏观应变下对大应力的响应。特别地,这些材料通常对施加的应力非常敏感,这些应力会导致自组装结构在流动或变形下逐渐分解。凝胶结构的这种解体可导致凝胶材料的“屈服”,即流化转变,随后是所得非均匀“果冻状”流体的剪切变稀。然而,当去除应力时,材料可以松弛回到其先前的平衡凝胶状态,即凝胶恢复。相比之下,非平衡材料只会以取决于加工历史的方式改变其形式和性质。因此,物理凝胶是独特的自愈材料,其中平衡的存在确保了它们最终的恢复。平衡的存在也对凝胶材料的线性和非线性流变响应的性质有影响,本文基于描述相变和聚合物溶液性质时常用的简单标度论证来探讨这一现象。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/451d/6318627/c39a39404c1b/gels-04-00019-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验