Suppr超能文献

基于卡尔曼自适应调整的甘蔗收获机分切刀高度检测

Height detection of crop divider toes of sugarcane harvester based on Kalman adaptive adjustment.

机构信息

Guangxi Key Laboratory of Intelligent Unmanned System and Intelligent Equipment, Nanning, China.

Guangxi Key Laboratory of Hybrid Computation and IC Design Analysis, Nanning, China.

出版信息

Sci Rep. 2023 Oct 5;13(1):16817. doi: 10.1038/s41598-023-43952-8.

Abstract

Crop divider toes are an essential device of sugarcane harvester. Moving forward against the ground is a critical way to improve the harvesting rate of lodged sugarcane. Height detection is the basis for precise control of crop divider toes moving forward against the ground. Due to the current problem of operating difficulties in manually adjusting the height of crop divider, a height detection system based on a millimeter wave radar sensor was designed to detect the height of crop divider toes from the ground. This paper proposed a height detection method of crop divider toes for sugarcane harvester based on Kalman adaptive adjustment. The data measured by the sensor was pretreated to determine whether the height had changed. Reset the Kalman filter and adjust the parameters when changes occur to improve the filter response speed and ranging accuracy. To adapt to the scenario of quickly adjusting the height of crop divider during the traveling process of sugarcane harvester. A one-way ANOVA test and a two-way ANOVA test were conducted on a simulated test platform. The results of the one-way ANOVA test showed that both forward speed and vegetation cover thickness had a significant effect on height detection accuracy. The results of the two-way ANOVA test showed that the interaction of forward speed and vegetation cover thickness did not have a significant effect on ranging accuracy. It was verified through experiments that both the ranging accuracy and the response speed of height change were significantly improved after the processing of the method in this paper. The mean square error after processing was lower than 2.5 cm. The feasibility of the height detection system was verified by field trials. The results of this study will provide a reference for the design of automatic elevation of crop divider.

摘要

作物分切器脚趾是甘蔗收获机的重要装置。向前移动是提高倒伏甘蔗收获率的关键方法。高度检测是精确控制作物分切器脚趾向前移动的基础。由于目前手动调整作物分切器高度操作困难的问题,设计了一种基于毫米波雷达传感器的高度检测系统,用于检测作物分切器脚趾离地高度。本文提出了一种基于卡尔曼自适应调整的甘蔗收获机作物分切器高度检测方法。对传感器测量的数据进行预处理,以确定高度是否发生变化。当发生变化时,重置卡尔曼滤波器并调整参数,以提高滤波器的响应速度和测距精度。为了适应甘蔗收获机在行进过程中快速调整作物分切器高度的场景。在模拟测试平台上进行了单向方差分析测试和双向方差分析测试。单向方差分析测试的结果表明,前进速度和植被覆盖厚度对高度检测精度都有显著影响。双向方差分析测试的结果表明,前进速度和植被覆盖厚度的相互作用对测距精度没有显著影响。通过实验验证,本文处理方法后,测距精度和高度变化响应速度都得到了显著提高,处理后的均方误差低于 2.5cm。田间试验验证了高度检测系统的可行性。本研究的结果将为作物分切器自动提升的设计提供参考。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/ee02/10556070/53cb2c32cbff/41598_2023_43952_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验