Suppr超能文献

孔口处吸附质 - 气体界面在多孔固体气体吸附中对下限闭合点的影响。

Effects of the adsorbate-gas interface at the pore opening on the lower closure point in gaseous adsorption in porous solids.

作者信息

Loi Quang K, Do D D

机构信息

Centre for Theoretical and Computational Molecular Science, Australian Institute of Bioengineering and Nanotechnology, The University of Queensland, St Lucia, QLD 4072, Australia.

School of Chemical Engineering, The University of Queensland, St Lucia, QLD 4072, Australia.

出版信息

J Colloid Interface Sci. 2024 Jan 15;654(Pt A):592-601. doi: 10.1016/j.jcis.2023.10.034. Epub 2023 Oct 11.

Abstract

The limit to the lower closure point (LCP) observed experimentally in the desorption isotherm of gases in porous solids has been commonly attributed to the homogeneous cavitation of the condensate in cavities. It was proposed recently that the experimental limit to LCP could be described in simulations with the ink-bottle pore, provided that the length of the uniformly sized conduit connecting the closed cavity to the surrounding is shorter than 2 nm, and the evaporation is by way of pore blocking mechanism, rather than homogeneous cavitation. To substantiate this assertion, that deviates from the commonly belief of homogeneous cavitation, we further investigated in this paper with cavities having wedge-like pore opening, that better mimics real solids, and offer further explanation on the limit of the LCP to the pore blocking as the mechanism of evaporation with simulations of argon and nitrogen adsorption over a range of temperatures that are commonly used experimentally. It was found that simulation results correctly captured the experimental observations for carbon-based materials and silica-based materials in that the limit of LCP shifts to higher reduced pressures for weaker adsorbing silica, compared to stronger adsorbing carbon and for a given adsorbent it also shifts to higher reduced pressure for higher temperatures.

摘要

在多孔固体中气体解吸等温线实验中观察到的下闭点(LCP)极限通常归因于孔穴中冷凝物的均匀空化。最近有人提出,在模拟中使用墨水瓶孔可以描述LCP的实验极限,前提是将封闭孔穴与周围环境连接起来的均匀尺寸管道的长度短于2纳米,并且蒸发是通过孔堵塞机制进行的,而不是均匀空化。为了证实这一与均匀空化的普遍观点不同的断言,我们在本文中进一步研究了具有楔形孔口的孔穴,这种孔穴更能模拟真实固体,并通过在一系列常用实验温度下对氩气和氮气吸附的模拟,对LCP极限与作为蒸发机制的孔堵塞之间的关系提供进一步解释。结果发现,模拟结果正确地捕捉到了碳基材料和硅基材料的实验观察结果,即与吸附性较强的碳相比,吸附性较弱的二氧化硅的LCP极限向更高的对比压力移动,并且对于给定的吸附剂,在更高温度下LCP也会向更高的对比压力移动。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验