Suppr超能文献

使用卷积自动编码器增强髋部X光以提高骨密度预测准确性

Enhancement of Hip X-ray with Convolutional Autoencoder for Increasing Prediction Accuracy of Bone Mineral Density.

作者信息

Nguyen Thong Phi, Chae Dong-Sik, Choi Sung Hoon, Jeong Kyucheol, Yoon Jonghun

机构信息

Department of Mechanical Design Engineering, Hanyang University, Seoul 04763, Republic of Korea.

BK21 FOUR ERICA-ACE Center, Hanyang University, Ansan 15588, Republic of Korea.

出版信息

Bioengineering (Basel). 2023 Oct 8;10(10):1169. doi: 10.3390/bioengineering10101169.

Abstract

It is very important to keep track of decreases in the bone mineral density (BMD) of elderly people since it can be correlated with the risk of incidence of major osteoporotic fractures leading to fatal injuries. Even though dual-energy X-ray absorptiometry (DXA) is the one of the most precise measuring techniques used to quantify BMD, most patients have restricted access to this machine due to high cost of DXA equipment, which is also rarely distributed to local clinics. Meanwhile, the conventional X-rays, which are commonly used for visualizing conditions and injuries due to their low cost, combine the absorption of both soft and bone tissues, consequently limiting its ability to measure BMD. Therefore, we have proposed a specialized automated smart system to quantitatively predict BMD based on a conventional X-ray image only by reducing the soft tissue effect supported by the implementation of a convolutional autoencoder, which is trained using proposed synthesized data to generate grayscale values of bone tissue alone. From the enhanced image, multiple features are calculated from the hip X-ray to predict the BMD values. The performance of the proposed method has been validated through comparison with the DXA value, which shows high consistency with correlation coefficient of 0.81 and mean absolute error of 0.069 g/cm.

摘要

跟踪老年人骨矿物质密度(BMD)的下降情况非常重要,因为这可能与导致致命伤害的主要骨质疏松性骨折的发病风险相关。尽管双能X线吸收法(DXA)是用于量化BMD的最精确测量技术之一,但由于DXA设备成本高昂,大多数患者难以使用该设备,而且该设备也很少分发到当地诊所。同时,传统X射线因其成本低而常用于观察病情和损伤情况,但它会同时吸收软组织和骨骼组织,因此限制了其测量BMD的能力。因此,我们提出了一种专门的自动化智能系统,仅通过减少软组织效应,基于传统X射线图像定量预测BMD,这通过实施卷积自动编码器来实现,该编码器使用所提出的合成数据进行训练,以单独生成骨组织的灰度值。从增强后的图像中,计算髋部X射线的多个特征以预测BMD值。通过与DXA值进行比较,验证了所提方法的性能,结果显示二者具有高度一致性,相关系数为0.81,平均绝对误差为0.069 g/cm²。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/a86a/10604653/b67ace254da9/bioengineering-10-01169-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验