Enhanced Performance of Inverted Perovskite Quantum Dot Light-Emitting Diode Using Electron Suppression Layer and Surface Morphology Control.

The energy level offset at inorganic layer-organic layer interfaces and the mismatch of hole/electron mobilities of the individual layers greatly limit the establishment of balanced charge carrier injection inside the emissive layer of halide perovskite light-emitting diodes (PeQLEDs). In contrast with other types of light-emitting devices, namely OLEDs and QLEDs, various techniques such as inserting an electron suppression layer between the emissive and electron transport layer have been employed as a means of establishing charge carrier injection into their respective emissive layers. Hence, in this study, we report the use of a thin layer of Poly(4-vinylpyridine) (PVPy) (an electron suppression material) placed between the emissive and electron transport layer of a halide PeQLEDs fabricated with an inverted configuration. With ZnO as the electron transport material, devices fabricated with a thin PVPy interlayer between the ZnO ETL and CsPbBr -based green QDs emissive layer yielded a 4.5-fold increase in the maximum observed luminance and about a 10-fold increase in external quantum efficiency (EQE) when compared to ones fabricated without PVPy. Furthermore, the concentration and coating process conditions of CsPbBr QDs were altered to produce various thicknesses and film properties which resulted in improved EQE values for devices fabricated with QDs thin films of lower surface root-mean-square (RMS) values. These results show that inhibiting the excessive injection of electrons and adjusting QDs layer thickness in perovskite-inverted QLEDs is an effective way to improve device luminescence and efficiency, thereby improving the carrier injection balance.