Xia Zhinan, Liu Bei, Xiao Yang, Hu Wanchao, Deng Mingxiao, Lü Changli
Institute of Chemistry, Northeast Normal University, Changchun 130024, P. R. China.
ACS Appl Mater Interfaces. 2023 Nov 30. doi: 10.1021/acsami.3c13496.
S-scheme heterojunction photocatalyst MAPbI@PCN-222 with light absorption extending to the NIR region is constructed by embedding organic-inorganic hybrid perovskite (MAPbI) into porphyrinic Zr-MOF (PCN-222). Both in situ X-ray photoelectron spectroscopy, ultraviolet photoelectron spectral characterization, and photocatalytic polymerization experiment prove the formation of S-scheme heterojunction. MAPbI@PCN-222 with a low dosage (90 ppm) displays an impressive photocatalytic ability for 980 nm light-mediated photoinduced electron/energy-transfer-reversible addition-fragmentation chain-transfer (PET-RAFT) polymerization in air. The well-defined controllable-molecular weight polymers including block copolymers and ultrahigh-molecular weight polymers can be achieved with narrow distributions (/ < 1.20) via rapid photopolymerization. The industrial application potential of the photocatalyst also has been proved by scale-up synthesis of polymers with low polydispersity under NIR light-induced photopolymerization in a large-volume reaction system (200 mL) with high monomer conversion up to 99%. The penetration photopolymerization through the 5 mm polytetrafluoroethylene plate and excellent photocontrollable behavior illustrate the existence of long-term photogenerated electron transfer of heterojunction and abundant free radicals in photopolymerization. The photocatalyst still retains high catalytic activity after 10 cycles of photopolymerization in air. It is revealed for the first time that the special PET-RAFT polymerization pathway is initiated by the aldehyde-bearing α-aminoalkyl radical derived from the oxidization of triethanolamine (TEOA) by the heterojunction photocatalyst. This research offers a new insight into understanding the NIR-light-activated PET-RAFT polymerization mechanism in the presence of TEOA.
通过将有机-无机杂化钙钛矿(MAPbI)嵌入卟啉基Zr-金属有机框架(PCN-222)中,构建了光吸收延伸至近红外区域的S型异质结光催化剂MAPbI@PCN-222。原位X射线光电子能谱、紫外光电子能谱表征以及光催化聚合实验均证明了S型异质结的形成。低剂量(90 ppm)的MAPbI@PCN-222在空气中对980 nm光介导的光诱导电子/能量转移-可逆加成-断裂链转移(PET-RAFT)聚合表现出令人印象深刻的光催化能力。通过快速光聚合,可以制备出分子量明确可控的聚合物,包括嵌段共聚物和超高分子量聚合物,且分布较窄(/ < 1.20)。在200 mL的大体积反应体系中,通过近红外光诱导光聚合制备出低多分散性聚合物,单体转化率高达99%,这也证明了该光催化剂在工业应用方面的潜力。通过5 mm聚四氟乙烯板的穿透光聚合以及优异的光控行为表明,异质结存在长期的光生电子转移,且光聚合过程中有大量自由基存在。该光催化剂在空气中经过10次光聚合循环后仍保留高催化活性。首次揭示了特殊的PET-RAFT聚合途径是由异质结光催化剂氧化三乙醇胺(TEOA)产生的含醛α-氨基烷基自由基引发的。这项研究为理解在TEOA存在下近红外光激活的PET-RAFT聚合机理提供了新的见解。