Observation and comparison of gas formation during holmium:YAG laser lithotripsy of cystine, uric acid, and calcium oxalate stones: a chromatographic and electron microscopic analysis.

The primary aim of the present in vitro study is to analyze the chemical content of the bubbles occurring during the fragmentation of cystine stones with both the high-power and low-power holmium:YAG (Ho:YAG) lasers. The secondary aim is to discuss their clinical importance. Three types of human renal calculi calcium oxalate monohydrate (COM), cystine, and uric acid were fragmented with both low-power and high-power Ho:YAG lasers in separate experimental setups at room temperature, during which time it was observed whether gas was produced. After laser lithotripsy, a cloudy white gas was obtained, after the fragmentation of cystine stones only. A qualitative gas content analysis was performed with a gas chromatography-mass spectrometry (GC-MS) device. The fragments in the aqueous cystine calculi setup were dried and taken to the laboratory to be examined by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) and X-ray diffraction analysis. No gas production was observed after fragmentation in the COM and uric acid stones. Free cystine, sulfur, thiophene, and hydrogen sulfide gas were produced by both low-power and high-power Ho:YAG laser lithotripsy of the cystine stones. In the SEM-EDX mapping analysis, a free cystine molecule containing 42.8% sulfur (S), 21% oxygen (O), 14.9% carbon (C), and 21% nitrogen (N) atoms was detected in the cystine stone experimental setup. The evidence obtained, which shows that hydrogen sulfide emerges in the gaseous environment during Ho:YAG laser fragmentation of cystine stones, indicates that caution is required to prevent the risk of in vivo production and toxicity.