二硅酸锂陶瓷的树脂粘结：微拉伸粘结强度评估

Resin Cementation of Lithium Disilicate Ceramic: A Microtensile Bond Strength Evaluation.

作者信息

Awad Mohamed M, Alhalabi Feras, Alanazi Abdulaziz Abdullah, Alanazi Abdulaziz Ali, Alshahrani Ghanem Abdullah, Fu Cheryl, Albaijan Refal Saad, Alkattan Rana, Fawzy Amr S

机构信息

UWA Dental School, University of Western Australia, 17 Monash Avenue, Nedlands, WA 6009, Australia.

Department of Conservative Dental Sciences, College of Dentistry, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia.

出版信息

Materials (Basel). 2023 Dec 27;17(1):137. doi: 10.3390/ma17010137.

DOI:10.3390/ma17010137

PMID:38203993

原文链接:https://pmc.ncbi.nlm.nih.gov/articles/PMC10779915/

Abstract

OBJECTIVE

The objective of this study was to evaluate the resin-ceramic adhesion of a long-carbon-chain silane (LCSI)-containing resin cement.

METHODS

Polished lithium disilicate ceramic discs were etched with hydrofluoric acid and randomly assigned into four groups; (PSAP), cemented using a silane-free resin cement with no prior priming; (PSAP-S), primed using a silane-containing primer before cementation using a silane-free resin cement; (PSAU), cemented using a LCSI-containing resin cement with no prior priming; (PSAU-S), primed as for the group (PSAP-S) and cemented using a LCSI-containing resin cement. The cemented blocks were sectioned into microbeams. The resin-ceramic microtensile bond strength (μTBS) was measured at 1 week and after thermocycling. The failure modes of the tested microbeams were evaluated.

RESULTS

The μTBS of the LCSI-containing and silane-free resin cements, either with or without a prior priming step, did not significantly differ. The adhesion of the LCSI-containing resin cement to lithium disilicate ceramic, either with or without a prior priming step, did not significantly deteriorate after artificial aging.

CONCLUSIONS

The long-carbon-chain silane (LCSI) monomer incorporated in the resin cement eliminated the need for a silane priming step of a hydrofluoric acid-etched lithium disilicate ceramic.

摘要

目的

本研究的目的是评估含长碳链硅烷（LCSI）的树脂水门汀与树脂陶瓷的黏附力。

方法

用氢氟酸蚀刻抛光的二硅酸锂陶瓷圆盘，并随机分为四组；（PSAP），使用无硅烷树脂水门汀粘结，不进行预涂底漆；（PSAP-S），在使用无硅烷树脂水门汀粘结前，先用含硅烷的底漆进行预涂；（PSAU），使用含LCSI的树脂水门汀粘结，不进行预涂底漆；（PSAU-S），按照（PSAP-S）组进行预涂，然后使用含LCSI的树脂水门汀粘结。将粘结块切成微梁。在1周和热循环后测量树脂-陶瓷微拉伸粘结强度（μTBS）。评估测试微梁的失效模式。