Rapid nanomolar detection of Δ-tetrahydrocannabinol in biofluids via electrochemical aptamer-based biosensor.

BACKGROUND

The fabrication of sensors capable of achieving rapid, sensitive, and highly selective detection of target molecules in complex fluids is key to realizing their real-world applications. For example, there is an urgent need in drugged driving roadside screening scenarios to develop a method that can be used for rapid drug detection and that avoids interference from the matrix in the sample. How to minimize the interference of complex matrices in biofluids at the electrode interface is the key to improve the sensitivity of the sensor.

RESULTS

This work develops a facile and green method to prepare rough electrodes with a porous structure for constructing electrochemical aptamer-based (EAB) sensors for rapid, sensitive and accurate detection of Δ-tetrahydrocannabinol (THC) in biofluids. The electroactive area of the rough electrode was 21 times of smooth electrode. And the antifouling performance of the rough electrode was much better than that of smooth electrode. Based on the unique advantages of the rough electrode, the developed EAB sensor achieves rapid nanomolar detection of THC in undiluted serum, undiluted urine and 50 % saliva with the detection limit of 5.0 nM, 10 nM and 10 nM, respectively. Moreover, our method possesses good reproducibility, accuracy and specificity.

SIGNIFICANCE

The porous structure can effectively reduce the non-specific adsorption and enhance the stability of the signal, while the larger active area can modify more aptamers, thus improving the sensitivity. The detection limits of the EAB sensor were lower than the cutoff concentration of THC in drugged driving and the measuring process was completed within 60 s after target addition, which makes the present sensors capable for real-world applications.