牙科中的空气喷砂：材料与性能参数的简要综述
Air-Abrasion in Dentistry: A Short Review of the Materials and Performance Parameters.
作者信息
Eram Afiya, Vinay Kr Rajath, K N Chethan, Keni Laxmikant G, Shetty Divya D, Zuber Mohammad, Kumar Saurabh, S Pradeep
机构信息
Department of Conservative Dentistry and Endodontics, Manipal College of Dental Sciences, Manipal, Manipal Academy of Higher Education, Manipal, India.
Department of Aeronautical & Automobile Engineering, Manipal Institute of Technology, Manipal, Manipal Academy of Higher Education, Manipal, India.
出版信息
J Biomed Phys Eng. 2024 Feb 1;14(1):99-110. doi: 10.31661/jbpe.v0i0.2310-1670. eCollection 2024 Feb.
The selection of abrasive material and parameters of the Air-Abrasion device for a particular application is a crucial detail. However, there are no standard recommendations or manuals for choosing these details; the operator must depend on his experience and knowledge of the procedure to select the best possible material and set of parameters. This short review attempts to identify some of the effects that the selection of material and parameters could have on the performance of the Air-Abrasion procedure for a particular application. The material and parameter data are collected from various studies and categorized according to the most popular materials in use right now. These studies are then analyzed to arrive at some inferences on the performance of Air-Abrasion materials and parameters. This review arrives at a few conclusions on the effectiveness of a material and parameter set, and that there is potential for developments in the area of standardizing parameter selection; also, there is scope for further studies on Bio-Active Glass as an alternative to the materials currently used in Air-Abrasion.
针对特定应用选择气磨设备的磨料材料和参数是一个关键细节。然而，对于选择这些细节并没有标准的建议或手册；操作人员必须依靠自己对该程序的经验和知识来选择最合适的材料和参数集。本简短综述试图确定材料和参数的选择可能对特定应用中气磨程序性能产生的一些影响。材料和参数数据是从各种研究中收集的，并根据目前使用最广泛的材料进行分类。然后对这些研究进行分析，以得出关于气磨材料和参数性能的一些推论。本综述得出了关于材料和参数集有效性的一些结论，并且在标准化参数选择领域有发展潜力；此外，作为气磨中目前使用材料的替代品，生物活性玻璃还有进一步研究的空间。
Zotero 插件