Department of Chemical Engineering, Indian Institute of Technology, Delhi, Hauz Khas, New Delhi 110016, India.
School of Interdisciplinary Research, Indian Institute of Technology, Delhi, Hauz Khas, New Delhi 110016, India.
Mol Pharm. 2024 Apr 1;21(4):1872-1883. doi: 10.1021/acs.molpharmaceut.3c01157. Epub 2024 Feb 29.
The foundation of a biosimilar manufacturer's regulatory filing is the demonstration of analytical and functional similarity between the biosimilar product and the pertinent originator product. The excipients in the formulation may interfere with characterization using typical analytical and functional techniques during this biosimilarity exercise. Consequently, the producers of biosimilar products resort to buffer exchange to isolate the biotherapeutic protein from the drug product formulation. However, the impact that this isolation has on the product stability is not completely known. This study aims to elucidate the extent to which mAb isolation via ultrafiltration-diafiltration-based buffer exchange impacts mAb stability. It has been demonstrated that repeated extraction cycles do result in significant changes in higher-order structure (red-shift of 5.0 nm in fluorescence maxima of buffer exchanged samples) of the mAb and also an increase in formation of basic variants from 19.1 to 26.7% and from 32.3 to 36.9% in extracted innovator and biosimilar Tmab samples, respectively. It was also observed that under certain conditions of tertiary structure disruptions, Tmab could be restabilized depending on formulation composition. Thus, mAb isolation through extraction with buffer exchange impacts the product stability. Based on the observations reported in this paper, we recommend that biosimilar manufacturers take into consideration these effects of excipients on protein stability when performing biosimilarity assessments.
生物类似药制造商监管备案的基础是证明生物类似药产品与相关原研产品在分析和功能上具有相似性。在进行这种相似性研究时,配方中的赋形剂可能会干扰使用典型的分析和功能技术进行的特性描述。因此,生物类似药产品的生产商采用缓冲液交换来将生物治疗蛋白从药物产品配方中分离出来。然而,这种分离对产品稳定性的影响尚不完全清楚。本研究旨在阐明通过基于超滤-透析的缓冲液交换分离单抗对单抗稳定性的影响程度。结果表明,重复提取循环确实会导致单抗的高级结构发生显著变化(缓冲液交换样品的荧光最大值红移 5.0nm),并且在提取的创新型和生物类似型 Tmab 样品中,碱性变异体的形成分别从 19.1%增加到 26.7%和从 32.3%增加到 36.9%。还观察到,在某些三级结构破坏条件下,根据配方成分,Tmab 可以重新稳定。因此,通过缓冲液交换提取分离单抗会影响产品稳定性。基于本文的观察结果,我们建议生物类似药制造商在进行生物类似性评估时考虑赋形剂对蛋白质稳定性的这些影响。