Chapla Rachel, Katz Rachel R, West Jennifer L
Department of Biomedical Engineering, Duke University, Durham, NC 27708 USA.
Department of Biomedical Engineering, University of Virginia, Charlottesville, VA 22904 USA.
Cell Mol Bioeng. 2024 Feb 12;17(1):35-48. doi: 10.1007/s12195-024-00794-2. eCollection 2024 Feb.
Scaffold materials that better support neurogenesis are still needed to improve cell therapy outcomes for neural tissue damage. We have used a modularly tunable, highly compliant, degradable hydrogel to explore the impacts of hydrogel compliance stiffness on neural differentiation. Here we implemented competitive matrix crosslinking mechanics to finely tune synthetic hydrogel moduli within soft tissue stiffnesses, a range much softer than typically achievable in synthetic crosslinked hydrogels, providing a modularly controlled and ultrasoft 3D culture model which supports and enhances neurogenic cell behavior.
Soluble competitive allyl monomers were mixed with proteolytically-degradable poly(ethylene glycol) diacrylate derivatives and crosslinked to form a matrix, and resultant hydrogel stiffness and diffusive properties were evaluated. Neural PC12 cells or primary rat fetal neural stem cells (NSCs) were encapsulated within the hydrogels, and cell morphology and phenotype were investigated to understand cell-matrix interactions and the effects of environmental stiffness on neural cell behavior within this model.
Addition of allyl monomers caused a concentration-dependent decrease in hydrogel compressive modulus from 4.40 kPa to 0.26 kPa (natural neural tissue stiffness) without influencing soluble protein diffusion kinetics through the gel matrix. PC12 cells encapsulated in the softest hydrogels showed significantly enhanced neurite extension in comparison to PC12s in all other hydrogel stiffnesses tested. Encapsulated neural stem cells demonstrated significantly greater spreading and elongation in 0.26 kPa alloc hydrogels than in 4.4 kPa hydrogels. When soluble growth factor deprivation (for promotion of neural differentiation) was evaluated within the neural stiffness gels (0.26 kPa), NSCs showed increased neuronal marker expression, indicating early enhancement of neurogenic differentiation.
Implementing allyl-acrylate crosslinking competition reduced synthetic hydrogel stiffness to provide a supportive environment for 3D neural tissue culture, resulting in enhanced neurogenic behavior of encapsulated cells. These results indicate the potential suitability of this ultrasoft hydrogel system as a model platform for further investigating environmental factors on neural cell behavior.
The online version contains supplementary material available at 10.1007/s12195-024-00794-2.
仍需要能更好支持神经发生的支架材料,以改善神经组织损伤的细胞治疗效果。我们使用了一种模块化可调、高度柔顺、可降解的水凝胶,来探究水凝胶柔顺度(刚度)对神经分化的影响。在此,我们采用竞争性基质交联力学,在软组织刚度范围内精细调节合成水凝胶的模量,该范围比合成交联水凝胶通常所能达到的要软得多,从而提供了一种模块化控制的超软3D培养模型,该模型支持并增强神经源性细胞行为。
将可溶性竞争性烯丙基单体与可蛋白酶降解的聚乙二醇二丙烯酸酯衍生物混合并交联形成基质,然后评估所得水凝胶的刚度和扩散特性。将神经PC12细胞或原代大鼠胎儿神经干细胞(NSCs)封装在水凝胶中,研究细胞形态和表型,以了解细胞 - 基质相互作用以及该模型中环境刚度对神经细胞行为的影响。
添加烯丙基单体导致水凝胶压缩模量从4.40 kPa浓度依赖性地降至0.26 kPa(天然神经组织刚度),而不影响可溶性蛋白质通过凝胶基质的扩散动力学。与在所有其他测试水凝胶刚度中的PC12细胞相比,封装在最软水凝胶中的PC12细胞显示出显著增强的神经突延伸。封装的神经干细胞在0.26 kPa水凝胶中比在4.4 kPa水凝胶中表现出明显更大的铺展和伸长。当在神经刚度凝胶(0.26 kPa)中评估可溶性生长因子剥夺(用于促进神经分化)时,神经干细胞显示出神经元标志物表达增加,表明神经源性分化的早期增强。
实施烯丙基 - 丙烯酸酯交联竞争降低了合成水凝胶的刚度,为3D神经组织培养提供了支持性环境,导致封装细胞的神经源性行为增强。这些结果表明这种超软水凝胶系统作为进一步研究神经细胞行为环境因素的模型平台具有潜在适用性。
在线版本包含可在10.1007/s12195 - 024 - 00794 - 2获取的补充材料。