Suppr超能文献

一种用于去除不同水体中药物污染物的可持续香蕉皮活性炭:制备、表征及应用

A Sustainable Banana Peel Activated Carbon for Removing Pharmaceutical Pollutants from Different Waters: Production, Characterization, and Application.

作者信息

Al-Sareji Osamah J, Grmasha Ruqayah Ali, Meiczinger Mónika, Al-Juboori Raed A, Somogyi Viola, Hashim Khalid S

机构信息

Sustainability Solutions Research Lab, Faculty of Engineering, University of Pannonia, Egyetem str. 10, H-8200 Veszprém, Hungary.

Environmental Research and Studies Center, University of Babylon, Babylon, Al-Hillah 51001, Iraq.

出版信息

Materials (Basel). 2024 Feb 23;17(5):1032. doi: 10.3390/ma17051032.

Abstract

Due to the growing concerns about pharmaceutical contamination and its devastating impact on the economy and the health of humans and the environment, developing efficient approaches for removing such contaminants has become essential. Adsorption is a cost-effective technique for removing pollutants. Thus, in this work, banana peels as agro-industrial waste were utilized for synthesizing activated carbon for removing pharmaceuticals, namely amoxicillin and carbamazepine from different water matrices. The chemically activated carbon by phosphoric acid (HPO) was carbonized at temperatures 350 °C, 450 °C and 550 °C. The material was characterized by several techniques such as scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), Boehm titration, point of zero charge (pH), BET surface area (S), the proximate and ultimate analyses, X-ray powder diffraction (XRD), and thermos-gravimetric analysis (TGA). The SEM of banana peel activated carbon (BPAC) depicted a semi-regular and heterogeneous morphology, characterized by an abundance of pores with diverse forms and sizes. Boehm titration revealed an increase in the amounts of acidic groups by 0.711 mmol/g due to activation by HPO. FTIR recorded different peaks suggesting significant modifications in the spectroscopic characteristics of the BPAC surface due to the successful activation and adsorption of the pollutant molecules. The pHpzc of BPAC was calculated to be 5.005. The S surface area dramatically increased to 911.59 m/g after the activation. The optimum conditions were 25 °C, a materials dosage of 1.2 g/L, a saturation time of 120 min, a pollutants mixture of 25 mg/L, and a pH of 5. Langmuir exhibits a slightly better fit than Freundlich with a low value of the residual sum of squares (SSE) and the data were better fitted to the pseudo-second-order kinetic. Furthermore, the efficacy of BPAC in eliminating pharmaceuticals from Milli Q water, lake water, and wastewater was successfully investigated over the seven cycles. The results of the present work highlighted a potential usage of agro-industrial waste in eliminating organic micropollutants while exhibiting sustainable management of this waste.

摘要

由于人们对药物污染及其对经济、人类健康和环境的破坏性影响日益担忧,开发高效去除此类污染物的方法变得至关重要。吸附是一种去除污染物的经济有效技术。因此,在本研究中,香蕉皮作为农业工业废弃物被用于合成活性炭,以去除不同水基质中的药物,即阿莫西林和卡马西平。用磷酸(HPO)化学活化的活性炭在350℃、450℃和550℃的温度下碳化。该材料通过多种技术进行表征,如扫描电子显微镜结合能量色散X射线光谱(SEM-EDS)、傅里叶变换红外光谱(FTIR)、 Boehm滴定、零电荷点(pH)、BET表面积(S)、近似和最终分析、X射线粉末衍射(XRD)以及热重分析(TGA)。香蕉皮活性炭(BPAC)的SEM显示出半规则且不均匀的形态,其特征是有大量形态和尺寸各异的孔隙。Boehm滴定表明,由于HPO活化,酸性基团的量增加了0.711 mmol/g。FTIR记录到不同的峰,表明由于污染物分子的成功活化和吸附,BPAC表面的光谱特征发生了显著变化。BPAC的pHpzc经计算为5.005。活化后,S表面积显著增加至911.59 m²/g。最佳条件为25℃、材料用量1.2 g/L、饱和时间120分钟、污染物混合物浓度25 mg/L以及pH为5。Langmuir拟合略优于Freundlich,残差平方和(SSE)值较低,数据更符合准二级动力学。此外,还成功研究了BPAC在七个循环中从超纯水、湖水和废水中去除药物的效果。本研究结果突出了农业工业废弃物在去除有机微污染物方面的潜在用途,同时展示了对该废弃物的可持续管理。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/8530/10934144/371ac8cea166/materials-17-01032-g001a.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验