Hua Yuchao, Guo Zeng-Yuan
Nantes Université, Laboratoire de thermique et énergie de Nantes, LTeN, F-44000 Nantes, France.
Tsinghua Uuniversity, Department of Engineering Mechanics, 100084 Beijing, China.
Phys Rev E. 2024 Feb;109(2-1):024130. doi: 10.1103/PhysRevE.109.024130.
Here, we investigate the maximum power and efficiency of thermoelectric generators through devising a set of protocols for the isothermal and adiabatic processes of thermoelectricity to build a Carnot-like thermoelectric cycle, with the analysis based on fluctuation theorem. The Carnot efficiency can be readily obtained for the quasistatic thermoelectric cycle with vanishing power. The maximum power-efficiency pair of the finite-time thermoelectric cycle is derived, which is found to have the identical form to that of Brownian motors characterized by the stochastic thermodynamics. However, it is of significant discrepancy compared to the linear-irreversible and endoreversible-thermodynamics based formulations. The distinction with the linear-irreversible-thermodynamics case could result from the difference in the definitions of Peltier and Seebeck coefficients in the thermoelectric cycle. As for the endoreversible thermodynamics, we argue the applicability of endoreversibility could be questionable for analyzing the Carnot-like thermoelectric cycle, due to the incompatibility of the endoreversible hypothesis that attributes the irreversibility to finite heat transfer with thermal reservoirs, though the distinction in the mathematical expressions can vanish with the assumption that the ratio of thermoelectric power factors at the high and low temperatures (γ) is equal to the square root of the temperature ratio, γ=sqrt[T_{L}/T_{H}] (this condition could significantly deviate from the practical case). Last, utilizing our models as a concise tool to evaluate the maximum power-efficiency pairs of realistic thermoelectric material, we present a case study on the n-type silicon.
在此,我们通过设计一套用于热电等温与绝热过程的协议来构建类卡诺热电循环,基于涨落定理进行分析,从而研究热电发电机的最大功率和效率。对于功率为零的准静态热电循环,可轻易得出卡诺效率。推导了有限时间热电循环的最大功率 - 效率对,发现其形式与以随机热力学为特征的布朗电机相同。然而,与基于线性不可逆和内可逆热力学的公式相比,存在显著差异。与线性不可逆热力学情况的区别可能源于热电循环中珀尔帖系数和塞贝克系数定义的不同。至于内可逆热力学,我们认为由于内可逆假设将不可逆性归因于与热库的有限热传递,而这与类卡诺热电循环不兼容,所以在内可逆性在分析类卡诺热电循环时的适用性可能存在问题,尽管在假设高温和低温下热电功率因子的比值(γ)等于温度比的平方根,即γ = sqrt[T_L/T_H](此条件可能与实际情况有很大偏差)时,数学表达式中的差异会消失。最后,利用我们的模型作为评估实际热电材料最大功率 - 效率对的简洁工具,我们给出了一个关于n型硅的案例研究。