Suppr超能文献

基于来自...的孢粉素的复合微胶囊中活性物质的刺激触发释放。 (原文句子不完整,翻译可能存在一定局限性)

Stimulus triggered release of actives from composite microcapsules based on sporopollenin from .

作者信息

Lecoeuche Muriel, Borovička Josef, Dyab Amro K F, Paunov Vesselin N

机构信息

Department of Chemistry, University of Hull Hull HU6 7RX UK.

Department of Chemistry, Nazarbayev University Kabanbay Batyr Avenue 53 Astana 010000 Kazakhstan

出版信息

RSC Adv. 2024 Mar 28;14(15):10280-10289. doi: 10.1039/d4ra00236a. eCollection 2024 Mar 26.

Abstract

Smart drug delivery systems (SDDSs) are a paradigm shift in drug delivery, particularly in microencapsulation technology where the drug is released in response to an internal and/or external stimulus. In this study, a smart microencapsulation platform was developed using three different types of stimuli triggered release of a model active (rhodamine 6G) from sporopollenin from . Triggers were based on pH-, thermal- and near infrared light-sensitive polymer composition. Carbopol nanogel and methylcellulose were used as responsive aqueous polymers for pH and thermally triggered release, respectively. Methylcellulose loaded with active and gold nanoparticles was used for photothermal triggered release. The formulations were encapsulated into the empty cores of sporopollenin microcapsules using the compressed tablet technique. The pH triggered release of the active was achieved above pH 7, which was mediated by the swelling of the carbopol nanogel that forced its way out of the elastic trilite scars of the sporopollenin. Results from measuring the active fluorescent intensity and its content over time confirmed the crucial role of carbopol in the pH triggered release. For the thermo-sensitive polymer methylcellulose, it was found that the release of the active from methylcellulose loaded sporopollenin was triggered upon heating the system reaching 90% whereas it levelled out at 40% for methylcellulose-free sporopollenin. The maximum amount of active was released at around 55 °C, where the sol-gel transition of the methylcellulose starts. Photothermally triggered release using near infrared (NIR) laser revealed that the amount of active released from sporopollenin loaded with both gold nanoparticles and methylcellulose was approximately four times higher than that from sporopollenin loaded with methylcellulose/active only, confirming the key role of gold nanoparticles in the release photothermal heating of the polymer formulation.

摘要

智能药物递送系统(SDDSs)是药物递送领域的一次范式转变,尤其是在微囊化技术中,药物会根据内部和/或外部刺激而释放。在本研究中,开发了一种智能微囊化平台,利用三种不同类型的刺激触发模型活性物质(罗丹明6G)从孢粉素中释放。触发机制基于对pH、热和近红外光敏感的聚合物组成。卡波姆纳米凝胶和甲基纤维素分别用作pH和热触发释放的响应性水性聚合物。负载活性物质和金纳米颗粒的甲基纤维素用于光热触发释放。使用压片技术将制剂封装到孢粉素微胶囊的空芯中。活性物质在pH高于7时实现pH触发释放,这是由卡波姆纳米凝胶的溶胀介导的,卡波姆纳米凝胶从孢粉素的弹性三缝痕中挤出。随着时间测量活性荧光强度及其含量的结果证实了卡波姆在pH触发释放中的关键作用。对于热敏聚合物甲基纤维素,发现加热系统达到90%时,负载甲基纤维素的孢粉素中活性物质开始释放,而对于无甲基纤维素的孢粉素,释放量在40%时趋于平稳。活性物质的最大释放量在约55°C时出现,此时甲基纤维素开始发生溶胶-凝胶转变。使用近红外(NIR)激光进行光热触发释放表明,负载金纳米颗粒和甲基纤维素的孢粉素释放的活性物质量大约是仅负载甲基纤维素/活性物质的孢粉素的四倍,证实了金纳米颗粒在聚合物制剂光热加热释放中的关键作用。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/c032/10975325/4cd9fd69c38a/d4ra00236a-f1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验