Practical potential of suspension electrodes for enhanced limiting currents in electrochemical CO reduction.

CO conversion is an important part of the transition towards clean fuels and chemicals. However, low solubility of CO in water and its slow diffusion cause mass transfer limitations in aqueous electrochemical CO reduction. This significantly limits the partial current densities towards any desired CO-reduction product. We propose using flowable suspension electrodes to spread the current over a larger volume and alleviate mass transfer limitations, which could allow high partial current densities for CO conversion even in aqueous environments. To identify the requirements for a well-performing suspension electrode, we use a transmission line model to simulate the local electric and ionic current distributions throughout a channel and show that the electrocatalysis is best distributed over the catholyte volume when the electric, ionic and charge transfer resistances are balanced. In addition, we used electrochemical impedance spectroscopy to measure the different resistance contributions and correlated the results with rheology measurements to show that particle size and shape impact the ever-present trade-off between conductivity and flowability. We combine the modelling and experimental results to evaluate which carbon type is most suitable for use in a suspension electrode for CO reduction, and predict a good reaction distribution throughout activated carbon and carbon black suspensions. Finally, we tested several suspension electrodes in a CO electrolyzer. Even though mass transport limitations should be reduced, the CO partial current densities are capped at 2.8 mA cm, which may be due to engineering limitations. We conclude that using suspension electrodes is challenging for sensitive reactions like CO reduction, and may be more suitable for use in other electrochemical conversion reactions suffering from mass transfer limitations that are less affected by competing reactions and contaminations.