Deep convolutional generative adversarial network for generation of computed tomography images of discontinuously carbon fiber reinforced polymer microstructures.

Computed tomography images are of utmost importance when characterizing the heterogeneous and complex microstructure of discontinuously fiber reinforced polymers. However, the devices are expensive and the scans are time- and energy-intensive. Through recent advances in generative adversarial networks, the instantaneous generation of endless numbers of images that are representative of the input images and hold physical significance becomes possible. Hence, this work presents a deep convolutional generative adversarial network trained on approximately 30,000 input images from carbon fiber reinforced polyamide 6 computed tomography scans. The challenge lies in the low contrast between the two constituents caused by the close proximity of the density of polyamide 6 and carbon fibers as well as the small fiber diameter compared to the necessary resolution of the images. In addition, the stochastic, heterogeneous microstructure does not follow any logical or predictable rules exacerbating their generation. The quality of the images generated by the trained network of 256 pixel 256 pixel was investigated through the Fréchet inception distance and nearest neighbor considerations based on Euclidean distance and structural similarity index measure. Additional visual qualitative assessment ensured the realistic depiction of the complex mixed single fiber and fiber bundle structure alongside flow-related physically feasible positioning of the fibers in the polymer. The authors foresee additionally huge potential in creating three-dimensional representative volume elements typically used in composites homogenization.