Suppr超能文献

城市尾水深度脱氮固体缓释碳源材料的制备与性能验证

Preparation and Performance Verification of a Solid Slow-Release Carbon Source Material for Deep Nitrogen Removal in Urban Tailwater.

作者信息

Luo Zhang, Shi Hongtao, Lyu Hanghang, Shi Hang, Liu Bo

机构信息

China Railway Engineering Services Co., Ltd., Chengdu 610083, China.

China Construction Eighth Engineering Division Co., Ltd., Shanghai 200135, China.

出版信息

Molecules. 2024 Apr 28;29(9):2031. doi: 10.3390/molecules29092031.

Abstract

Urban tailwater typically has a low carbon-to-nitrogen ratio and adding external carbon sources can effectively improve the denitrification performance of wastewater. However, it is difficult to determine the dosage of additional carbon sources, leading to insufficient or excessive addition. Therefore, it is necessary to prepare solid slow-release carbon source (SRC) materials to solve the difficulty in determining the dosage of carbon sources. This study selected two SRCs of slow-release carbon source 1 (SRC1) and slow-release carbon source 2 (SRC2), with good slow-release performance after static carbon release and batch experiments. The composition of SRC1 was: hydroxypropyl methylcellulose/disodium fumarate/polyhydroxy alkanoate (HPMC/DF/PHA) at a ratio of 3:2:4, with an FeO mass fraction of 3%. The composition of SRC2 was: HPMC/DF/PHA with a ratio of 1:1:1 and an FeO mass fraction of 3%. The fitted equations of carbon release curves of SRC1 and SRC2 were = 61.91 + 7190.24e and = 47.92 + 8770.42e, respectively. The surfaces of SRC1 and SRC2 had a loose and porous morphological structure, which could increase the specific surface area of materials and be more conducive to the adhesion and metabolism of microorganisms. The experimental nitrogen removal by denitrification with SRCs showed that when the initial total nitrogen concentration was 40.00 mg/L, the nitrate nitrogen (NO-N) concentrations of the SRC1 and SRC2 groups on the 10th day were 2.57 and 2.66 mg/L, respectively. On the 20th day, the NO-N concentrations of the SRC1 and SRC2 groups were 1.67 and 2.16 mg/L, respectively, corresponding to removal efficiencies of 95.83% and 94.60%, respectively. The experimental results indicated that SRCs had a good nitrogen removal effect. Developing these kinds of materials can provide a feasible way to overcome the difficulty in determining the dosage of carbon sources in the process of heterotrophic denitrification.

摘要

城市尾水通常碳氮比低,添加外部碳源可有效提高废水的反硝化性能。然而,难以确定额外碳源的投加量,导致投加不足或过量。因此,有必要制备固体缓释碳源(SRC)材料来解决碳源投加量难以确定的问题。本研究选取了缓释碳源1(SRC1)和缓释碳源2(SRC2)两种SRC,经静态释碳和批次实验后具有良好的缓释性能。SRC1的组成是:羟丙基甲基纤维素/富马酸二钠/聚羟基烷酸酯(HPMC/DF/PHA),比例为3:2:4,FeO质量分数为3%。SRC2的组成是:HPMC/DF/PHA比例为1:1:1,FeO质量分数为3%。SRC1和SRC2的碳释放曲线拟合方程分别为 = 61.91 + 7190.24e和 = 47.92 + 8770.42e。SRC1和SRC2的表面具有疏松多孔的形态结构,可增加材料的比表面积,更有利于微生物的附着和代谢。用SRC进行反硝化的实验脱氮结果表明,当初始总氮浓度为40.00 mg/L时,第10天SRC1组和SRC2组的硝酸盐氮(NO-N)浓度分别为2.57和2.66 mg/L。第20天,SRC1组和SRC2组的NO-N浓度分别为1.67和2.16 mg/L,相应的去除效率分别为95.83%和94.60%。实验结果表明SRC具有良好的脱氮效果。开发这类材料可为克服异养反硝化过程中碳源投加量难以确定的问题提供一条可行途径。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验