Department of Chemical Engineering, Sathyabama Institute of Science and Technology, Chennai, India.
Department of Energy and Environmental Engineering, Saveetha School of Engineering, SIMATS, Saveetha University, Chennai, 602105, Tamilnadu, India.
Sci Rep. 2024 Jun 4;14(1):12818. doi: 10.1038/s41598-024-61113-3.
Recent years have seen an increase in research on biodiesel, an environmentally benign and renewable fuel alternative for traditional fossil fuels. Biodiesel might become more cost-effective and competitive with diesel if a solid heterogeneous catalyst is used in its production. One way to make biodiesel more affordable and competitive with diesel is to employ a solid heterogeneous catalyst in its manufacturing. Based on X-ray diffraction (XRD) and Fourier Transform infrared spectroscopy (FTIR), the researchers in this study proved their hypothesis that iron oxide core-shell nanoparticles were generated during the green synthesis of iron-based nanoparticles (FeNPs) from Camellia Sinensis leaves. The fabrication of spherical iron nanoparticles was successfully confirmed using scanning electron microscopy (SEM). As a heterogeneous catalyst, the synthesised catalyst has shown potential in facilitating the conversion of algae oil into biodiesel. With the optimal parameters (0.5 weight percent catalytic load, 1:6 oil-methanol ratio, 60 °C reaction temperature, and 1 h and 30 min reaction duration), a 93.33% yield was attained. This may be due to its acid-base property, chemical stability, stronger metal support interaction. Furthermore, the catalyst was employed for transesterification reactions five times after regeneration with n-hexane washing followed by calcination at 650 °C for 3 h.
近年来,人们对生物柴油的研究越来越多,生物柴油是一种环境友好且可再生的传统化石燃料替代品。如果在生物柴油的生产中使用固体多相催化剂,它可能会变得更具成本效益,更具竞争力。如果在制造过程中使用固体多相催化剂,就可以使生物柴油更具成本效益,更具竞争力。本研究通过 X 射线衍射(XRD)和傅里叶变换红外光谱(FTIR),证明了他们的假设,即在绿茶叶片中铁基纳米粒子(FeNPs)的绿色合成过程中生成了氧化铁核壳纳米粒子。使用扫描电子显微镜(SEM)成功地证实了球形铁纳米粒子的制备。作为多相催化剂,所合成的催化剂在促进藻类油转化为生物柴油方面显示出了潜力。在最佳参数(0.5 重量%的催化负荷、1:6 的油甲醇比、60°C 的反应温度和 1 小时 30 分钟的反应时间)下,产率达到了 93.33%。这可能是由于其酸碱特性、化学稳定性、更强的金属支撑相互作用。此外,在使用正己烷洗涤和在 650°C 下煅烧 3 小时进行再生后,该催化剂被用于五次酯交换反应。