Suppr超能文献

锥形楔形非骨水泥型“Accolade II”柄的柄干对线在全髋关节置换术后5年内不影响骨密度。

Stem Alignment With the Tapered Wedge Cementless Stem "Accolade II" Does Not Affect Bone Mineral Density Over 5 Years After Total Hip Arthroplasty.

作者信息

Tsujino Masashi, Iwakiri Kentaro, Ohta Yoichi, Minoda Yukihide, Kobayashi Akio, Nakamura Hiroaki

机构信息

Department of Orthopaedic Surgery, Shiraniwa Hospital Joint Arthroplasty Center, Nara, Japan.

Department of Orthopaedic Surgery, Osaka City University Graduate School of Medicine, Osaka, Japan.

出版信息

Arthroplast Today. 2024 Jun 7;27:101433. doi: 10.1016/j.artd.2024.101433. eCollection 2024 Jun.

Abstract

BACKGROUND

This study aimed to investigate the relationship between 3-dimensional (3D) alignment and postoperative bone mineral density (BMD) changes with Accolade II tapered wedge stems, which have a different proximal shape from other tapered wedge stems, up to 5 years after primary total hip arthroplasty.

METHODS

We retrospectively analyzed the hips of 89 patients who underwent total hip arthroplasty using the second-generation proximally coated cementless stem (Accolade II; Stryker Orthopedics, Mahwah, NJ) at our institution from 2014 to 2018 over a 5-year follow-up. We evaluated the relationship between stem alignment, measured using 3D-templating software, and BMD changes in the 7 Gruen zones and compared the data with those from a former study using other short taper-wedge stems.

RESULTS

BMDs in zones 1 and 7 continued to decrease gradually every year after surgery, and BMD in zone 7 showed the largest decrease (21%) from baseline over 5 years. No correlation was found between stem alignment (varus/valgus, flexion/extension, and anteversion/retroversion) and changes in BMD in each zone over 5 years.

CONCLUSIONS

Our data showed no correlation between 3D stem alignment and changes in BMD in each Gruen zone over 5 years. This suggests that the Accolade II stem may fit better into any shape of the proximal medullary canal because of its unique characteristics.

摘要

背景

本研究旨在调查Accolade II锥形楔形柄(其近端形状与其他锥形楔形柄不同)在初次全髋关节置换术后长达5年的三维(3D)对线与术后骨密度(BMD)变化之间的关系。

方法

我们回顾性分析了2014年至2018年在我们机构接受全髋关节置换术的89例患者的髋关节,使用第二代近端涂层非骨水泥柄(Accolade II;史赛克骨科,新泽西州马哈瓦)进行了为期5年的随访。我们评估了使用3D模板软件测量的柄对线与7个Gruen区骨密度变化之间的关系,并将数据与之前一项使用其他短锥形楔形柄的研究数据进行了比较。

结果

术后第1区和第7区的骨密度每年继续逐渐下降,第7区的骨密度在5年内从基线下降幅度最大(21%)。在5年期间,未发现柄对线(内翻/外翻、屈曲/伸展以及前倾角/后倾角)与各区骨密度变化之间存在相关性。

结论

我们的数据表明,在5年期间,3D柄对线与每个Gruen区的骨密度变化之间无相关性。这表明Accolade II柄因其独特的特性可能更适合近端髓腔的任何形状。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/290a/11214367/d87159b8be99/gr1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验