Ryabov Nikolay A, Volova Larisa T, Alekseev Denis G, Kovaleva Svetlana A, Medvedeva Tatyana N, Vlasov Mikhail Yu
Research Institute of Biotechnology "BioTech", Samara State Medical University of the Ministry of Health of the Russian Federation, 443079 Samara, Russia.
Core Shared Research Facility "Industrial Biotechnologies", Federal Research Center "Fundamentals of Biotechnology" of the Russian Academy of Sciences, 117312 Moscow, Russia.
Polymers (Basel). 2024 Jul 2;16(13):1895. doi: 10.3390/polym16131895.
The current paper highlights the active development of tissue engineering in the field of the biofabrication of living tissue analogues through 3D-bioprinting technology. The implementation of the latter is impossible without important products such as bioinks and their basic components, namely, hydrogels. In this regard, tissue engineers are searching for biomaterials to produce hydrogels with specified properties both in terms of their physical, mechanical and chemical properties and in terms of local biological effects following implantation into an organism. One of such effects is the provision of the optimal conditions for physiological reparative regeneration by the structural components that form the basis of the biomaterial. Therefore, qualitative assessment of the composition of the protein component of a biomaterial is a significant task in tissue engineering and bioprinting. It is important for predicting the behaviour of printed constructs in terms of their gradual resorption followed by tissue regeneration due to the formation of a new extracellular matrix. One of the most promising natural biomaterials with significant potential in the production of hydrogels and the bioinks based on them is the polymer collagen of allogeneic origin, which plays an important role in maintaining the structural and biological integrity of the extracellular matrix, as well as in the morphogenesis and cellular metabolism of tissues, giving them the required mechanical and biochemical properties. In tissue engineering, collagen is widely used as a basic biomaterial because of its availability, biocompatibility and facile combination with other materials. This manuscript presents the main results of a mass spectrometry analysis (proteomic assay) of the lyophilized hydrogel produced from the registered Lyoplast bioimplant (allogeneic human bone tissue), which is promising in the field of biotechnology. Proteomic assays of the investigated lyophilized hydrogel sample showed the presence of structural proteins (six major collagen fibers of types I, II, IV, IX, XXVII, XXVIII were identified), extracellular matrix proteins, and mRNA-stabilizing proteins, which participate in the regulation of transcription, as well as inducer proteins that mediate the activation of regeneration, including the level of circadian rhythm. The research results offer a new perspective and indicate the significant potential of the lyophilized hydrogels as an effective alternative to synthetic and xenogeneic materials in regenerative medicine, particularly in the field of biotechnology, acting as a matrix and cell-containing component of bioinks for 3D bioprinting.
本文重点介绍了通过3D生物打印技术在生物制造活组织类似物领域中组织工程的积极发展。如果没有生物墨水及其基本成分(即水凝胶)等重要产品,后者的实施是不可能的。在这方面,组织工程师正在寻找生物材料,以生产具有特定物理、机械和化学性质以及植入生物体后局部生物学效应的水凝胶。其中一种效应是由构成生物材料基础的结构成分提供生理修复再生的最佳条件。因此,对生物材料蛋白质成分组成的定性评估是组织工程和生物打印中的一项重要任务。这对于预测打印构建体在逐渐吸收后的行为很重要,随后由于新细胞外基质的形成而实现组织再生。同种异体来源的聚合物胶原蛋白是最有前途的天然生物材料之一,在生产水凝胶和基于它们的生物墨水中具有巨大潜力,它在维持细胞外基质的结构和生物完整性以及组织的形态发生和细胞代谢中起着重要作用,赋予它们所需的机械和生化特性。在组织工程中,胶原蛋白因其可用性、生物相容性以及与其他材料的容易组合而被广泛用作基本生物材料。本手稿展示了对注册的Lyoplast生物植入物(同种异体人骨组织)产生的冻干水凝胶进行质谱分析(蛋白质组学测定)的主要结果,该生物植入物在生物技术领域很有前景。对所研究的冻干水凝胶样品的蛋白质组学分析表明存在结构蛋白(鉴定出了I、II、IV、IX、XXVII、XXVIII型六种主要胶原纤维)、细胞外基质蛋白和参与转录调节的mRNA稳定蛋白,以及介导再生激活的诱导蛋白,包括昼夜节律水平。研究结果提供了一个新的视角,并表明冻干水凝胶作为再生医学中合成和异种材料的有效替代品具有巨大潜力,特别是在生物技术领域,可作为3D生物打印生物墨水的基质和含细胞成分。