Trumpour Tiana, du Toit Carla, van Gaalen Alissa, Park Claire K S, Rodgers Jessica R, Mendez Lucas C, Surry Kathleen, Fenster Aaron
Department of Medical Biophysics, Western University, London, Canada.
Robarts Research Institute, London, Canada.
Sci Rep. 2024 Aug 9;14(1):18459. doi: 10.1038/s41598-024-69211-y.
High dose-rate brachytherapy is a treatment technique for gynecologic cancers where intracavitary applicators are placed within the patient's pelvic cavity. To ensure accurate radiation delivery, localization of the applicator at the time of insertion is vital. This study proposes a novel method for acquiring, registering, and fusing three-dimensional (3D) trans-abdominal and 3D trans-rectal ultrasound (US) images for visualization of the pelvic anatomy and applicators during gynecologic brachytherapy. The workflow was validated using custom multi-modal pelvic phantoms and demonstrated during two patient procedures. Experiments were performed for three types of intracavitary applicators: ring-and-tandem, ring-and-tandem with interstitial needles, and tandem-and-ovoids. Fused 3D US images were registered to magnetic resonance (MR) and computed tomography (CT) images for validation. The target registration error (TRE) and fiducial localization error (FLE) were calculated to quantify the accuracy of our fusion technique. For both phantom and patient images, TRE and FLE across all modality registrations (3D US versus MR or CT) resulted in mean ± standard deviation of 4.01 ± 1.01 mm and 0.43 ± 0.24 mm, respectively. This work indicates proof of concept for conducting further clinical studies leveraging 3D US imaging as an accurate, accessible alternative to advanced modalities for localizing brachytherapy applicators.
高剂量率近距离放射治疗是一种针对妇科癌症的治疗技术,其中腔内施源器放置在患者的盆腔内。为确保精确的放射治疗,施源器在插入时的定位至关重要。本研究提出了一种新方法,用于获取、配准和融合三维(3D)经腹和3D经直肠超声(US)图像,以在妇科近距离放射治疗期间可视化盆腔解剖结构和施源器。该工作流程使用定制的多模态盆腔模型进行了验证,并在两个患者手术过程中进行了演示。针对三种类型的腔内施源器进行了实验:环形串联式、带组织间针的环形串联式和串联卵圆体式。将融合后的3D US图像与磁共振(MR)和计算机断层扫描(CT)图像进行配准以进行验证。计算目标配准误差(TRE)和基准定位误差(FLE)以量化我们融合技术的准确性。对于模型和患者图像,所有模态配准(3D US与MR或CT)的TRE和FLE分别导致平均±标准差为4.01±1.01毫米和0.43±0.24毫米。这项工作表明了利用3D US成像作为一种准确、可及的替代先进模态来定位近距离放射治疗施源器的概念验证,可用于开展进一步的临床研究。