Lechtenfeld Christian-Timo, Buchmann Julius, Hagemeister Jan, Bela Marlena M, van Wickeren Stefan, Stock Sandro, Daub Rüdiger, Wiemers-Meyer Simon, Winter Martin, Nowak Sascha
Münster Electrochemical Energy Technology (MEET), University of Münster, Corrensstraße 46, 48149, Münster, Germany.
School of Engineering and Design, Institute for Machine Tools and Industrial Management (iwb), Technical University of Munich (TUM), Boltzmannstraße 15, 85748, Garching, Germany.
Adv Sci (Weinh). 2024 Oct;11(39):e2405897. doi: 10.1002/advs.202405897. Epub 2024 Aug 19.
Despite a substantial impact on various economic and cell technology factors, the influence of electrolyte quantities is rarely addressed in research. This study examines the impact of varying electrolyte quantities on cell performance and aging processes using three different electrolytes: LP57 (1 M LiPF6 in ethylene carbonate:ethyl methyl carbonate (EC:EMC 3:7 w/w), LP572 (LP57+2 wt.% vinylene carbonate (VC)) and LP57 + absVC (18.351 mg VC). Comprehensive analytical post mortem investigations revealed that continuous excessive electrolyte decomposition determines the performance of cells using LP57, leading to enhanced irreversible lithium-ion loss and interphase thickening with increasing electrolyte volume. Impedance rise due to the growth of the interphase was also identified as the cause of degrading cell performance with rising amounts of LP572, attributed to an increasingly pronounced consumption of VC rather than electrolyte aging effects. By varying the electrolyte quantity while maintaining a constant amount VC within the cell system, the differences in cell performance were minimized, and observed deteriorating effects were suppressed. This study demonstrates the sensitive interdependence of electrolyte volume and additive concentration, practically affecting aging behavior. Comprehensively understanding the characteristics of each individual electrolyte component and tailoring the electrolytes to cell-specific cell properties proves to be crucial to optimize cell performance.
尽管电解液用量对各种经济和电池技术因素有重大影响,但在研究中很少涉及电解液用量的影响。本研究使用三种不同的电解液,即LP57(1 M LiPF6溶于碳酸乙烯酯:碳酸甲乙酯(EC:EMC 3:7 w/w))、LP572(LP57 + 2 wt.% 碳酸亚乙烯酯(VC))和LP57 + absVC(18.351 mg VC),研究了不同电解液用量对电池性能和老化过程的影响。全面的尸检分析表明,持续的过度电解液分解决定了使用LP57的电池的性能,导致不可逆锂离子损失增加以及随着电解液体积增加界面增厚。由于界面生长导致的阻抗增加也被确定为随着LP572用量增加电池性能下降的原因,这归因于VC消耗日益显著,而非电解液老化效应。通过在电池系统中保持VC用量恒定的同时改变电解液用量,电池性能差异最小化,且观察到的性能恶化效应得到抑制。本研究证明了电解液体积与添加剂浓度之间敏感的相互依存关系,实际影响着老化行为。全面了解每种电解液成分的特性并根据电池特定性能定制电解液对于优化电池性能至关重要。