Guo Yiqing, Zhang Xuan, Liu Xin, Wu Xiaomin, Min Jingchun
Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Energy and Power Engineering, Tsinghua University, Beijing 100084, China.
Department of Energy and Power Engineering, School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China.
Langmuir. 2024 Sep 10;40(36):19086-19095. doi: 10.1021/acs.langmuir.4c02161. Epub 2024 Aug 27.
Deformation of sessile droplets under shear flow is widespread in both nature and industry. Previous research focuses on the shedding process of sessile droplets under shear airflow, with insufficient attention paid to the droplet deformation before shedding. In this work, experimental studies on the deformation behaviors of sessile droplets under shear airflow are conducted to investigate the effects of airflow velocity and droplet volume on the tangential and normal droplet deformations. Scaling laws of the droplet deformations are established. The results show that the profile of sessile droplets changes under shear airflow with the topmost point exhibiting periodic oscillations in both tangential and normal directions. The oscillation period of the tangential deformation exceeds that of the normal deformation. The average tangential deformation of droplets increases with the increasing airflow velocity and droplet volume. The average normal deformation of droplets increases with the increasing airflow velocity and is influenced by the droplet volume at a higher airflow velocity. The contact angle on the windward side oscillates periodically, and its average value significantly decreases. The contact angle of droplets on the windward side decreases as the airflow velocity and droplet volume increase, while the contact angle on the leeward side remains almost unchanged. The average deformation of droplets in the tangential and normal directions is linearly related to the effective Weber number and the square of the effective Weber number. These findings could be used to predict the deformation of sessile droplets under shear airflows.
在自然界和工业中,剪切流作用下固着液滴的变形现象十分普遍。以往的研究主要集中在剪切气流作用下固着液滴的脱落过程,而对液滴脱前的变形关注不足。在这项工作中,开展了剪切气流作用下固着液滴变形行为的实验研究,以考察气流速度和液滴体积对液滴切向和法向变形的影响。建立了液滴变形的标度律。结果表明,在剪切气流作用下,固着液滴的轮廓发生变化,其最高点在切向和法向均呈现周期性振荡。切向变形的振荡周期超过法向变形的振荡周期。液滴的平均切向变形随气流速度和液滴体积的增加而增大。液滴的平均法向变形随气流速度的增加而增大,且在较高气流速度下受液滴体积的影响。迎风侧的接触角周期性振荡,其平均值显著减小。迎风侧液滴的接触角随气流速度和液滴体积的增加而减小,而背风侧的接触角几乎保持不变。液滴在切向和法向的平均变形与有效韦伯数及有效韦伯数的平方呈线性关系。这些发现可用于预测剪切气流作用下固着液滴的变形。