Paulausks Artūrs, Mazurs Austris, Mohylyuk Valentyn
Leading Research Group, Faculty of Pharmacy, Rīga Stradiņš University, LV-1007 Riga, Latvia.
Pharmaceutics. 2024 Aug 21;16(8):1100. doi: 10.3390/pharmaceutics16081100.
The deformulation stage of original drug products, which includes the quantification of critical excipients, is crucial for the successful development of generic drug products of solid dosage form. Sodium lauryl sulphate (SLS) belongs to the group of critical excipients due to its influence on the bioavailability of drugs, such as metformin. The purpose of this work is to carry out a feasibility study in order to develop a simple, economical, and robust analytical method for the quantification of SLS in metformin-containing tablets after their dissolution in water. Firstly, SLS is extracted with chloroform in acidic conditions, followed by the addition of methylene blue (MB) in order to form a SLS-MB ion pair, which is then measured photometrically at a wavelength of 651 nm. Additionally, interference from matrix components (excipients and APIs) was assessed, and it was found that metformin also forms a blue complex; therefore, this specific extraction method was developed. Other matrix components did not interfere with SLS determination. This method shows a well-estimated precision of 3.3% and accuracy of 5%, a calibration linearity of R = 0.99990, and a working range of 0.38 µg/mL to 10 µg/mL of SLS in water. The midpoint of the calibration graph corresponds to the concentration of SLS obtained by dissolving a single tablet in 1 L of water. This method seems appropriate for total SLS determination in tablets and can be applicable for deformulation.
原研药品的逆向工程阶段,包括关键辅料的定量分析,对于成功开发固体剂型的仿制药至关重要。月桂醇硫酸酯钠(SLS)因其对药物(如二甲双胍)生物利用度的影响,属于关键辅料类别。本研究的目的是开展一项可行性研究,以开发一种简单、经济且稳健的分析方法,用于定量测定含二甲双胍片剂在水中溶解后SLS的含量。首先,在酸性条件下用氯仿萃取SLS,随后加入亚甲蓝(MB)以形成SLS-MB离子对,然后在651nm波长处进行光度测定。此外,评估了基质成分(辅料和活性成分)的干扰,发现二甲双胍也会形成蓝色络合物;因此,开发了这种特定的萃取方法。其他基质成分不干扰SLS的测定。该方法的精密度估计良好,为3.3%,准确度为5%,校准线性R = 0.99990,水中SLS的工作范围为0.38μg/mL至10μg/mL。校准曲线的中点对应于将一片片剂溶解在1L水中所得到的SLS浓度。该方法似乎适用于片剂中总SLS的测定,并且可应用于逆向工程。