Suppr超能文献

胶原蛋白和结晶度在天然骨移植材料物理化学性质中的作用。

The role of collagen and crystallinity in the physicochemical properties of naturally derived bone grafts.

作者信息

Øvrebø Øystein, Orlando Luca, Rubenis Kristaps, Ciriello Luca, Ma Qianli, Giorgi Zoe, Tognoni Stefano, Loca Dagnija, Villa Tomaso, Nogueira Liebert P, Rossi Filippo, Haugen Håvard J, Perale Giuseppe

机构信息

Department of Chemistry, Materials and Chemical Engineering "Giulio Natta", Politecnico di Milano, 20133 Milano, Italy.

Department of Biomaterials, Institute of Clinical Dentistry, University of Oslo, 0318 Oslo, Norway.

出版信息

Regen Biomater. 2024 Aug 14;11:rbae093. doi: 10.1093/rb/rbae093. eCollection 2024.

Abstract

Xenografts are commonly used for bone regeneration in dental and orthopaedic domains to repair bone voids and other defects. The first-generation xenografts were made through sintering, which deproteinizes them and alters their crystallinity, while later xenografts are produced using cold-temperature chemical treatments to maintain the structural collagen phase. However, the impact of collagen and the crystalline phase on physicochemical properties have not been elucidated. We hypothesized that understanding these factors could explain why the latter provides improved bone regeneration clinically. In this study, we compared two types of xenografts, one prepared through a low-temperature chemical process (Treated) and another subsequently sintered at 1100°C (Sintered) using advanced microscopy, spectroscopy, X-ray analysis and compressive testing. Our investigation showed that the Treated bone graft was free of residual blood, lipids or cell debris, mitigating the risk of pathogen transmission. Meanwhile, the sintering process removed collagen and the carbonate phase of the Sintered graft, leaving only calcium phosphate and increased mineral crystallinity. Microcomputed tomography revealed that the Treated graft exhibited an increased high porosity (81%) and pore size compared to untreated bone, whereas the Sintered graft exhibited shrinkage, which reduced the porosity (72%), pore size and strut size. Additionally, scanning electron microscopy displayed crack formation around the pores of the Sintered graft. The Treated graft displayed median mechanical properties comparable to native cancellous bone and clinically available solutions, with an apparent modulus of 166 MPa, yield stress of 5.5 MPa and yield strain of 4.9%. In contrast, the Sintered graft exhibited a lower median apparent modulus of 57 MPa. It failed in a brittle manner at a median stress of 1.7 MPa and strain level of 2.9%, demonstrating the structural importance of the collagen phase. This indicates why bone grafts prepared through cold-temperature processes are clinically favourable.

摘要

异种移植物常用于牙科和骨科领域的骨再生,以修复骨缺损和其他缺陷。第一代异种移植物是通过烧结制成的,这会使其脱蛋白并改变其结晶度,而后来的异种移植物则采用低温化学处理来维持结构胶原相。然而,胶原蛋白和晶相对物理化学性质的影响尚未阐明。我们推测,了解这些因素可以解释为什么后者在临床上能提供更好的骨再生效果。在本研究中,我们使用先进的显微镜、光谱学、X射线分析和压缩测试,比较了两种异种移植物,一种是通过低温化学过程制备的(处理过的),另一种是随后在1100°C烧结的(烧结的)。我们的研究表明,处理过的骨移植物没有残留血液、脂质或细胞碎片,降低了病原体传播的风险。同时,烧结过程去除了烧结移植物中的胶原蛋白和碳酸盐相,只留下磷酸钙并提高了矿物结晶度。微型计算机断层扫描显示,与未处理的骨相比,处理过的移植物具有更高的高孔隙率(81%)和孔径,而烧结移植物则出现收缩,降低了孔隙率(72%)、孔径和支柱尺寸。此外,扫描电子显微镜显示烧结移植物的孔隙周围形成了裂纹。处理过的移植物表现出与天然松质骨和临床可用解决方案相当的中位力学性能,表观模量为166 MPa,屈服应力为5.5 MPa,屈服应变为4.9%。相比之下,烧结移植物的中位表观模量较低,为57 MPa。它在中位应力为1.7 MPa和应变水平为2.9%时以脆性方式失效,证明了胶原相的结构重要性。这表明了为什么通过低温过程制备的骨移植物在临床上更具优势。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/00c4/11368411/4db102fdcd55/rbae093f7.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验