Design and characterization of geopolymer foams reinforced with fibres.

This paper presents the results of the optimisation and characterization of Miscanthus fibre reinforced geopolymer foams based on fly ash and represents an important step forward in the development of a sustainable and environmentally friendly insulation material. Miscanthus belongs to a promising group of renewable raw materials with favourable thermal insulation properties. Design of experiment (DoE) were used to optimize the thermal conductivity and compressive strength of e reinforced geopolymer foams. In addition, the samples was analyzed using X-ray diffraction (XRD), Field emission scanning electron microscopy (SEM) and Fourier-Transform Infrared Spectroscopy (FTIR). Mixtures with a low thermal conductivity of 0.056 W (m K) and a porosity of 79 vol% achieved a compressive strength of only 0.02 MPa. In comparison, mixtures with a thermal conductivity of 0.087 W (m K) and a porosity of 58 vol% achieved a compressive strength of 0.45 MPa. Based on the determined parameters especially due to the low compressive strength, an application as cavity insulation or insulation between rafters is possible.