Suppr超能文献

一种用于验证功能性肺成像方法的合成肺模型(ASYLUM)显示,基于信号的通气测量和基于变形场的通气测量之间存在显著差异。

A synthetic lung model (ASYLUM) for validation of functional lung imaging methods shows significant differences between signal-based and deformation-field-based ventilation measurements.

作者信息

Voskrebenzev Andreas, Gutberlet Marcel, Klimeš Filip, Kaireit Till F, Shin Hoen-Oh, Kauczor Hans-Ulrich, Welte Tobias, Wacker Frank, Vogel-Claussen Jens

机构信息

Institute for Diagnostic and Interventional Radiology, Hannover Medical School, Hannover, Germany.

Biomedical Research in Endstage and Obstructive Lung Disease Hannover (BREATH), Member of the German Center for Lung Research, Hannover, Germany.

出版信息

Front Med (Lausanne). 2024 Sep 4;11:1418052. doi: 10.3389/fmed.2024.1418052. eCollection 2024.

Abstract

INTRODUCTION

Validation of functional free-breathing MRI involves a comparison to more established or more direct measurements. This procedure is cost-intensive, as it requires access to patient cohorts, lengthy protocols, expenses for consumables, and binds working time. Therefore, the purpose of this study is to introduce a synthetic lung model (ASYLUM), which mimics dynamic MRI acquisition and includes predefined lung abnormalities for an alternative validation approach. The model is evaluated with different registration and quantification methods and compared with real data.

METHODS

A combination of trigonometric functions, deformation fields, and signal combinations were used to create 20 synthetic image time series. Lung voxels were assigned either to normal or one of six abnormality classes. The images were registered with three registration algorithms. The registered images were further analyzed with three quantification methods: deformation-based or signal-based regional ventilation (JVent/RVent) analysis and perfusion amplitude (QA). The registration results were compared with predefined deformations. Quantification methods were evaluated regarding predefined amplitudes and with respect to sensitivity, specificity, and spatial overlap of defects. In addition, 36 patients with chronic obstructive pulmonary disease were included for verification of model interpretations using CT as the gold standard.

RESULTS

One registration method showed considerably lower quality results (76% correlation vs. 92/97%,  ≤ 0.0001). Most ventilation defects were correctly detected with RVent and QA (e.g., one registration variant with sensitivity ≥78%, specificity ≥88). Contrary to this, JVent showed very low sensitivity for lower lung quadrants (0-16%) and also very low specificity (1-29%) for upper lung quadrants. Similar patterns of defect detection differences between RVent and JVent were also observable in patient data: Firstly, RVent was more aligned with CT than JVent for all quadrants ( ≤ 0.01) except for one registration variant in the lower left region. Secondly, stronger differences in overlap were observed for the upper quadrants, suggesting a defect bias in the JVent measurements in the upper lung regions.

CONCLUSION

The feasibility of a validation framework for free-breathing functional lung imaging using synthetic time series was demonstrated. Evaluating different ventilation measurements, important differences were detected in synthetic and real data, with signal-based regional ventilation assessment being a more reliable method in the investigated setting.

摘要

引言

自由呼吸功能磁共振成像(MRI)的验证需要与更成熟或更直接的测量方法进行比较。这个过程成本高昂,因为它需要获取患者队列、冗长的方案、消耗品费用,并且占用工作时间。因此,本研究的目的是引入一种合成肺模型(ASYLUM),该模型模拟动态MRI采集,并包括预定义的肺部异常,用于替代验证方法。使用不同的配准和量化方法对该模型进行评估,并与真实数据进行比较。

方法

使用三角函数、变形场和信号组合的组合来创建20个合成图像时间序列。肺体素被分配为正常或六个异常类别之一。使用三种配准算法对图像进行配准。对配准后的图像进一步使用三种量化方法进行分析:基于变形或基于信号的区域通气(JVent/RVent)分析和灌注幅度(QA)。将配准结果与预定义的变形进行比较。根据预定义的幅度以及缺陷的敏感性、特异性和空间重叠来评估量化方法。此外,纳入36例慢性阻塞性肺疾病患者,以CT作为金标准验证模型解释。

结果

一种配准方法显示质量结果明显较低(相关性为76%,而其他为92/97%,≤0.0001)。使用RVent和QA可以正确检测到大多数通气缺陷(例如,一种配准变体的敏感性≥78%,特异性≥88)。与此相反,JVent对下肺象限的敏感性非常低(0-16%),对上肺象限的特异性也非常低(1-29%)。在患者数据中也观察到RVent和JVent之间类似的缺陷检测差异模式:首先,除了左下区域的一种配准变体外,对于所有象限,RVent比JVent与CT的一致性更高(≤0.01)。其次,在上象限观察到更强的重叠差异,表明JVent在上肺区域测量中存在缺陷偏差。

结论

证明了使用合成时间序列对自由呼吸功能肺成像验证框架的可行性。评估不同的通气测量方法时,在合成数据和真实数据中检测到了重要差异,在研究环境中基于信号的区域通气评估是一种更可靠的方法。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/354c/11409849/f6d956ae082b/fmed-11-1418052-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验