Zheng Zhu-An, Ye Zimo, Zheng Xiangyu
School of Automotive Engineering, Yancheng Institute of Technology, No. 1 Middle Hope Avenue, Tinghu District, Yancheng City, 224000, Jiangsu Province, China.
Sci Rep. 2024 Sep 27;14(1):22317. doi: 10.1038/s41598-024-72960-5.
Targeting the lateral motion control problem in the intelligent vehicle autopilot structural system, this paper proposes a feedforward + predictive LQR algorithm for lateral motion control based on Genetic Algorithm (GA) parameter optimisation and PID steering angle compensation. Firstly, based on the vehicle dynamics tracking error model, the intelligent vehicle LQR lateral motion controller as well as the feedforward controller are designed, and upon which the predictive controller is added to eliminate the system lag.Subsequently, exploiting the advantage that the PID algorithm is not model-based, a PID steering angle compensation controller that can directly control and correct the lateral error is designed. Second, a LQR controller based on path tracking deviation is designed by using the parameter rectification method of genetic algorithm (GA), which optimizes the control parameters of the lateral motion controller and improves the adaptivity of the control accuracy. Finally, Based on the Carsim-Simulink co-simulation platform, the simulation validation and analysis of double lane change (DLC) test and circular condition test (CCT) are carried out, and the results indicate that compared with the other two LQR controllers, the optimised controllers improved more than 50% in lateral error and heading error control, and the vehicle sideslip angle and vehicle yaw rate are in the range of -0.05° to 0.05° and - 0.15 rad/s to 0.10 rad/s, and it showed improved performance in tracking accuracy and satisfied vehicle stability constrains.
针对智能车辆自动驾驶结构系统中的横向运动控制问题,本文提出了一种基于遗传算法(GA)参数优化和PID转向角补偿的前馈+预测LQR横向运动控制算法。首先,基于车辆动力学跟踪误差模型,设计了智能车辆LQR横向运动控制器以及前馈控制器,并在此基础上加入预测控制器以消除系统滞后。随后,利用PID算法不依赖模型的优点,设计了一种能够直接控制和校正横向误差的PID转向角补偿控制器。其次,采用遗传算法(GA)的参数整定方法设计了基于路径跟踪偏差的LQR控制器,对横向运动控制器的控制参数进行优化,提高了控制精度的适应性。最后,基于Carsim-Simulink联合仿真平台,进行了双移线(DLC)测试和圆周工况测试(CCT)的仿真验证与分析,结果表明,与其他两种LQR控制器相比,优化后的控制器在横向误差和航向误差控制方面提高了50%以上,车辆侧偏角和车辆横摆率分别在-0.05°至0.05°和-0.15rad/s至0.10rad/s范围内,在跟踪精度方面表现出更好的性能,满足车辆稳定性约束。