Suppr超能文献

标志性骨嵴的创建对提高机器人辅助脊柱侧凸手术中椎弓根螺钉置入精度的影响。

Impact of landmark crater creation on improving accuracy of pedicle screw insertion in robot-assisted scoliosis surgery.

机构信息

Department of Orthopaedic Surgery, Shinshu University School of Medicine, 3-1-1 Asahi, Matsumoto, Nagano, 390-8621, Japan.

Faculty of Textile Science and Technology, Shinshu University, 3-15-1 Tokida, Ueda, Nagano, 386-8567, Japan.

出版信息

Eur Spine J. 2024 Dec;33(12):4730-4739. doi: 10.1007/s00586-024-08506-0. Epub 2024 Oct 4.

Abstract

PURPOSE

This study evaluated the impact of the Landmark Crater (LC) method on pedicle perforation rates in robot-guided surgery for pediatric scoliosis for each pedicle diameter.

METHODS

Seventy-six scoliosis patients underwent robot-assisted posterior spinal fusion. The cohort consisted of 19 male and 57 female patients, with a mean ± standard deviation age of 17.5 ± 7.7 years and a preoperative Cobb angle of 57.0 ± 18.5°. The LC method is a method in which craters that serves as a landmark are created in advance at the planned PS insertion site of all pedicles within the intraoperative CT imaging area. The patients were divided into the LC group, in which PS insertion was performed using the LC method, and the control group using the conventional PS insertion method. Overall and pedicle perforation rates for each pedicle outer diameter were compared between the groups by Fisher's exact test.

RESULTS

The LC group exhibited a significantly lower pedicle major perforation rate than did the control group (2.7% vs. 6.2%, P = 0.001). The perforation rates in pedicles with a pedicle outer diameter > 6 mm, 4-6 mm, 2-4 mm, and < 2 mm were 0.61%, 1.6%, 5.1%, and 21%, in the LC group and 0.75%, 4.1%, 12%, and 50% in the control group, respectively.

CONCLUSION

In robot-assisted surgery for pediatric scoliosis, the LC method enabled significantly lower pedicle perforation rates over the conventional method. Both the LC and conventional methods exhibited higher perforation rates for smaller pedicle diameters.

摘要

目的

本研究评估了地标 crater(LC)方法对儿童脊柱侧凸机器人辅助手术中每个椎弓根直径的椎弓根穿孔率的影响。

方法

76 例脊柱侧凸患者接受机器人辅助后路脊柱融合术。该队列包括 19 名男性和 57 名女性患者,平均年龄为 17.5±7.7 岁,术前 Cobb 角为 57.0±18.5°。LC 方法是一种在术中 CT 成像区域内所有椎弓根的计划 PS 插入部位预先创建作为地标 crater 的方法。患者分为 LC 组,使用 LC 方法进行 PS 插入,对照组使用常规 PS 插入方法。通过 Fisher 精确检验比较两组之间所有椎弓根外径的总体和椎弓根穿孔率。

结果

LC 组的椎弓根大穿孔率明显低于对照组(2.7%比 6.2%,P=0.001)。椎弓根外径>6mm、4-6mm、2-4mm 和<2mm 的椎弓根穿孔率分别为 LC 组 0.61%、1.6%、5.1%和 21%,对照组为 0.75%、4.1%、12%和 50%。

结论

在儿童脊柱侧凸的机器人辅助手术中,LC 方法比传统方法显著降低了椎弓根穿孔率。LC 法和传统法对较小的椎弓根直径均表现出较高的穿孔率。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验