Colloidal Characteristics of Poly(L-Lactic Acid)-b-Poly (ε-Caprolactone) Block Copolymer-Based Nanoparticles Obtained by an Emulsification/Evaporation Method.

Poly(L-lactic acid) (PLLA) and poly(ε-caprolactone) (PCL), two biodegradable and biocompatible polymers that are commonly used for biomedical applications, are, respectively, the result of the ring-opening polymerization of LA and ε-CL, cyclic esters, which can be produced according to several mechanisms (cationic, monomer-activated cationic, anionic, and coordination-insertion), except for L-lactide, which is polymerized only by anionic, cationic, or coordination-insertion polymerization. A series of well-defined PLLA-b-PCL block copolymers have been obtained starting from the same PLLA homopolymer, having a molar mass of 2500 g·mol, and being synthesized by coordination-insertion in the presence of tin octoate. PCL blocks were obtained via a cationic-activated monomer mechanism to limit transesterification reactions, and their molar masses varied from 1800 to 18,500 g·mol. The physicochemical properties of the copolymers were determined by H NMR, SEC, and DSC. Moreover, a series of nanoparticles (NPs) were prepared starting from these polyester-based copolymers by an emulsification/evaporation method. The sizes of the obtained NPs varied between 140 and 150 nm, as a function of the molar mass of the copolymers. Monomodal distribution curves with PDI values under 0.1 were obtained by Dynamic Light Scattering (DLS) and their spherical shape was confirmed by TEM. The increase in the temperature from 25 to 37 °C induced only a very slight decrease in the NP sizes. The results obtained in this preliminary study indicate that NPs have a temperature stability, allowing us to consider their use as drug-loaded nanocarriers for biomedical applications.